Performance
Wavelength |
1590 nm |
Rx power (min) |
-38 dBmW |
Maximum transfer distance |
80000 m |
Fiber mode structure |
Single-mode |
Link budget |
33 dB |
Fiber cable diameters supported |
9/125 µm |
Tx power (min) |
-5 dBmW |
Networking
Ethernet LAN data rates |
10, 100 Mbit/s |
Auto MDI/MDI-X |
Y |
Duplex system |
Half, Full |
Additionally
Ethernet LAN (RJ-45) ports quantity |
1 |
Wireless technologies |
Wired |
Transfer rate (Mbps) |
100 Mbit/s |
IE-MiniFiberLinX-II,TP-TX/FX-CWDM-SM1590-SC (w/o AC Adapter)
Compact Fiber Optic CPE Device for Industrial-Grade Delivery of Transparent LAN Services over Fiber, with Media Conversion, Carrier Grade Remote Management and Line Provisioning Capabilities.
Transparent LAN service providers require remote management capabilities, and must be able to isolate management traffic and customer data. The compact IE-MiniFiberLinX-II, functioning as a more advanced Network Interface Device (NID), is designed for operation by service providers and campus network administrators. It provisions point-to-point fiber optic connections and provides a remote network interface at the customer’s location that monitors the entire link between two locations.
The IE-MiniFiberLinX-II for fiber optic networks allows service providers to deliver managed, high-bandwidth "triple play" voice, video and data services to the customer premises. As a copper-to-fiber media converter, the IE-MiniFiberLinX-II allows low-cost copper switches to connect to the fiber line. Offering unparalleled flexibility, the it supports multiple fiber types including multi-mode and single-mode as well as singlestrand fiber, doubling the capacity of installed fiber. Coarse Wavelength Division Multiplexing (CWDM) functionality is also an option.
The IE-MiniFiberLinX-II comes equipped with one 100 Mbps fiber port for data and management, one 10/100 twisted pair port for customer data, as well as an RS-232 port for local configuration on the unit during installation.
The IE-MiniFiberLinX-II supports multiple powering options. Use the included AC power adapter or use the DC terminal block. Additionally, the IE-MiniFiberLinX-II with Telco Power models support -48 VDC office batteries that are commonly used in Telco applications*. Also compliant with the IEEE 802.3af Power over Ethernet standard, the IE-MiniFiberLinX-II can function as a Powered Device (PD) to draw power when connected to 802.3af-compliant Power Sourcing Equipment (PSE).
- Smallest stand-alone fiber optic network interface device
- VLAN compatible - secure and separate customer traffic
- VLAN filtering
- Supports passive 802.3ah OAM (Operations, Administration & Management)
- Bandwidth limiting per port/per direction Extra Tagging (Q-in-Q)
- -48 VDC terminal for Telco applications
- Supports Remote Loopback with MAC Address Swap
- Last Gasp SNMP Trap support
<b>Management</b>
- Carrier-grade SNMP management and line provisioning
- Link Loss and Loopback troubleshooting
- Free iView² software allows remote bandwidth management and traffic prioritization