Other features
| Compliance industry standards |
IEEE 802.3, IEEE 802.3u |
| Transmission distance (max) |
20 km |
| Fiber type |
9/125 μm |
| Operating temperature (T-T) |
-49 - 185 °F |
Performance
| Fiber cable diameters supported |
9/125 µm |
| Wavelength |
1310 nm |
| Maximum transfer distance |
20 m |
| Fiber mode structure |
Single-mode |
Operational conditions
| Operating altitude |
0 - 3048 m |
Power
| Input voltage |
48 V |
| Input current |
0.02 A |
Networking
| Ethernet LAN data rates |
10, 100 Mbit/s |
Additionally
| Transfer rate (Mbps) |
100 Mbit/s |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1310-SC (1310xmt/1550rcv), 20 km
Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisioning capabilities.
The compact IE-MiniFiberLinX-II/Telco is one of the most versatile fiber optic NID devices available on the market today. It provides point-to-point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II/Telco was designed to work with -48 VDC power that is compliant with the Bellcore GR-499 specification, supporting the minimum and maximum transient voltages, typically required by transport equipment used in Telco environments. Other key features include; carrier grade remote SNMP management, extra tagging using Q-in-Q, and PoE (Power over Ethernet).
As a copper-to-fiber converter, the IE-MiniFiberLinX-II/Telco supports multiple fiber types including multimode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. It allows for remote configuration, provides vital alerts to network administrators, and can manage the CPE and fiber link as a single entity.
Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the IE-MiniFiberLinX-II/Telco also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing Equipment (PSE).
- Loopback troubleshooting.
- Power options: AC, DC and 802.3af Power over Ethernet (PoE).
- Preserves complete end-to-end fiber connection integrity.
- Includes bi-directional bandwidth control.
- Read/write IEEE 802.1Q VLAN-tags.
- QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority).
- Layer 2 packet switching, store and forward operation.
- Forwarding rate: 14,880pps for 10 Mbps, 148,800pps for 100 Mbps.
- MTU: Supports over-sized packets up to 1536 bytes.
- SNMP V1 and V2c compatible.
- Managed via Telnet.
- IEEE 802.3x Flow Control.
- Includes DHCP and TFTP clients.
- Supports the Unified Management Agent (UMA).
- IEEE 802.3 10Base-T twisted pair.
- IEEE 802.3u 100Base-TX twisted pair.
- IEEE 802.3u 100Base-FX or SX fiber.
- Supports passive 802.3ah OAM (Operation, Administration & Management).
