Other features
Transmission distance (max) |
10 km |
Operating temperature (T-T) |
32 - 122 °F |
Networking
Auto MDI/MDI-X |
Y |
Duplex system |
Half, Full |
Ethernet LAN data rates |
10, 100 Mbit/s |
Operational conditions
Operating altitude |
0 - 3048 m |
Performance
Maximum transfer distance |
10000 m |
Fiber mode structure |
Single-mode |
Wavelength |
1310 nm |
Additionally
Ethernet LAN (RJ-45) ports quantity |
1 |
Wireless technologies |
Wired |
Transfer rate (Mbps) |
100 Mbit/s |
iMcV-FiberLinX-II, TX/FX-SM1310-SC
<b>iMcV-FiberLinX-II Optical Ethernet Demarcation Unit</b>
The iMcV-FiberLinX-II solution connects a host/remote network over fiber optics. Building on the success of the original iMcV-FiberLinX solution, the iMcV-FiberLinX-II combines media conversion with an advanced-feature set for network management and troubleshooting, including OAM (Operations, Administration and Maintenance), Extra-Tagging and EtherType control functionality. With the iMcV-FiberLinX-II, administrators can observe the end-points, and the fiber link between them, as single management entities and not as separate elements. Host management traffic is not visible to the remote or customer network nor is access to the customer network required, guaranteeing end-to-end data integrity.
iMcV-FiberLinX-II allows for remote configuration and alerts administrators to any potential problems on the long-haul fiber run, provides vital information on link condition and reports data traffic statistics. In addition, it reduces the total cost of network equipment by functioning as a copper-to-fiber media converter, allowing deployment of lower cost copper switches at both ends of the fiber connection. In addition to the iMcV-FiberLinX-II's support for Host/Remote environments, the product also has built-in support for the Unified Management Agent (UMA). With UMA, the central location can manage all devices installed in an iMediaChassis with the single IP address of the chassis.
Optional single- or dual-SFP port versions or all copper (RJ-45) port versions are also available for complete network flexibility. The iMcV-FiberLinX-II SFP requires one or two MSA compliant fiber optic SFP modules (sold seperately) to operate. Copper SFPs are not supported. IMC Networks offers a full range of compatible SFPs.