Power
| Power consumption (max) |
8 W |
| DC output current |
1.2 A |
| Power over Ethernet (PoE) |
Y |
Camera
| Field of view (FOV) angle |
45 ° |
| Pan range |
0 - 350 ° |
| Tilt angle |
0 - 100 ° |
| Minimum illumination |
0.05 lx |
Night vision
| Night vision distance |
8 - 12 m |
| LED type |
IR |
| Night vision |
Y |
| Infra-red wavelength |
850 nm |
Lens system
| Lens diameter |
8 mm |
| Zoom capability |
Y |
System requirements
| Mac operating systems supported |
Y |
Storage
| Maximum memory card size |
32 GB |
| Card reader integrated |
Y |
Video
| Frame rate |
25 fps |
| Full HD |
N |
| Megapixel |
1 MP |
| Privacy masking |
Y |
Performance
| Day/night mode |
Y |
| Alarm input/output |
Y |
| Type |
IP |
Additionally
| Ethernet LAN connection |
Y |
| Wireless technologies |
Wireless |
CMOS 1/3", 1 MP, 1280 x 720, 0.05 Lux, IR 10 Leds/0.05 W/850 nm, 10/100 MBit, PoE, 368 g
<b>INSTAR IN-6012HD PoE Pan & Tilt Indoor Camera</b>
The IN-6012HD is an allround solution for indoor surveillance. The camera head is remotely controlable and equipped with infrared diodes to utilize night vision in pitch dark environments. The integrated IR cut filter on the other hand allows for the capturing of native colours, as seen by the human eye. Through the use of an efficient h.264 compression codec it is able of recording video files on a SD memory card with comparably small size but best picture results. Any device (i.e. smartphones) can connect to the cameras web interface and allows you to control the pan & tilt feature. With 350 degree horizontally and 100 degree vertically the pan and tilt feature basicly covers the whole area in front of the camera. Thanks to its compact size and its modern design you won't be just limited to use it as a surveillance camera but also for your personal projects. The FTP support allows you to use the IN-6012 HD as a multi functional webcam for integration on your website.
<b>What is Power-over-Ethernet?</b>
Thanks to the Power-over-Ethernet (PoE) technology it is possible to supply power devices without a dedicated power supply.
In this case, a PoE-enabled switch is required for the power supply. Alternately you can use a PoE injector to inject the power requirements into the same cable responsible for data transfer.
Modern office buildings offer countless network connection but a sparse amount of power sockets. With the use of PoE, power sockets are not even required anymore nor are they essential for our PoE cameras to work. Most devices only need a fraction of the max. power output of a conventional socket. So by using PoE enabled devices on both ends will not only save you from the troubles with cable apocalypse but also save your remaining power sockets for other devices.
INSTAR also offers the IN-PoE1000 PoE Injector. This optional product is compatible with all INSTAR PoE cameras.
<b>OmniVision WDR Sensor</b>
The 1/3 inch WDR sensor is built on a 4.3 micron OmniPixel3-HS Pixel enabling 720p HD at unparalleled low-light sensitivity and a dynamic range in colour of 115 dB – compared to the 60 db of a regular VGA IP Camera. WDR allows you to capture high detailed colour videos even in high-contrast environmental lighting conditions.
