Ports & interfaces
| Host interface |
PCI |
| Internal |
Y |
Networking
| Maximum operating distance |
100 m |
| Copper ethernet cabling technology |
10BASE-T, 100BASE-TX |
| Flow control support |
Y |
| Chipset |
Realtek |
| Ethernet LAN data rates |
10, 100 Mbit/s |
Other features
| Networking features |
Fast Ethernet |
| Compliance industry standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Link/Act LED |
Y |
| Network ready |
Y |
| Ports quantity |
1 |
Protocols
| Supported network protocols |
CSMA/CD, TCP/IP |
Bandwidth
| Full duplex |
Y |
| Supported data transfer rates |
10/100Mbps |
Additionally
| Wireless technologies |
Wired |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Transfer rate (Mbps) |
200 Mbit/s |
| Ethernet LAN connection |
Y |
10/100 Mbps PCI Fast Ethernet network card
The PEF 132 network card is a 32-bit device enabling the connection of personal computers to data communication networks. It is compatible with PCI bus specification revisions 2.1 and 2.2 and supports automatic configuration (plug-and-play) of IRQ and the I/O address from the BIOS of the computer in which it is being installed.
Comes with a 10/100 Mbps RJ45 port, with speed auto-negotiation, enabling it to reach transfer rates of up to 200 Mbps in Full-Duplex mode. It uses the renowned “single-chip” Realtek controller and supports the “PCI Bus Master” resource, reducing the need for CPU processing from the computer where the network card is installed, thus optimizing general data communication performance.
- Connects computers to data communication networks
- Transfer speeds of up to 200 Mbps
- 10/100 Mbps Fast Ethernet port
- Compatible with Windows® and Linux®
- Auto MDI/MDI-X for automatic detection of cable type (normal/crossover)
- One 10/100 Mbps port with speed auto-negotiation (N-Way)
- LEDs indicating link/port activity
- 32-bit PCI bus
- Automatic configuration of IRQ and the I/O address
- Installation manual in Portuguese and Spanish
