Technical details
| Diameter |
110 mm |
| Number of speeds |
2 |
| Timer duration (maximum) |
7 h |
| Height adjustment |
N |
| Cord length |
1.65 m |
| Timer |
Y |
3 x 16 W, 220 - 240 V/ 50 Hz, 1 kg
Who doesn’t know the familiar problem of trying to reconcile oppressive summer heat in the workplace with the divergent wishes of colleagues? Fan on, fan off. High speed, low speed. It’s too loud. The draft doesn’t reach everyone. Or perhaps the fan is on the other side of the office, and only benefits some people. Klarstein presents a remedy to this problem with the Skyscraper Office set of 3 table fans: their chic and especially space-saving column design, with its mere 11 cm diameter and 27 cm height, fits easily on desks, workbenches or in office cabinets. The clearly-designed body blends wonderfully both in modern and classic environments.
The mini tower fans blow fresh air in two speeds (high and low), in order to cool down your workspace. Switchable oscillation swings the column of the Klarstein Skyscraper Office fans in a 180-degree angle from left to right and back. A built-in timer function can be used to automatically turn the cool air fans off after a set amount of time. This way, you can always rest assured that they aren't running unnecessarily, even if you forget to switch them off manually. The timer can be set in 1-hour increments between one and seven hours.
With only 16 watt power consumption, these little fans are really big ones when it comes to economical continuous operation. They do not interfere with the work of your colleagues: a further highlight is their quiet operating noise. In addition, the Skyscraper Office fans feature a built-in filter to remove dust and dirt particles from the air, so that you can breathe in summer air deeply, refreshed - without disputes with coworkers about how and where the office fan will work.
The Klarstein pedestal fans are controlled via a charming top-side, 4-button touch panel. Illuminated displays show the selected settings in self-explanatory settings. Each fan has four non-slip rubber feet which provide stable footing, while a 1.6 metre long cable allows flexible placement in the workplace.
