Networking
| Flow control support |
Y |
| Ethernet LAN data rates |
10, 100 Mbit/s |
| Auto MDI/MDI-X |
Y |
| Duplex system |
Half, Full |
| Store-and-forward |
Y |
| Auto-negotiation |
Y |
| Copper ethernet cabling technology |
100BASE-TX, 10BASE-T |
Performance
| Wavelength |
1310 nm |
| Maximum transfer distance |
2000 m |
| Fiber mode structure |
Multi-mode |
| Tx power (max) |
-14 dBmW |
| Wavelength-division multiplexing (WDM) |
Y |
| Rx power (max) |
-31 dBmW |
| Rx power (min) |
-14 dBmW |
| Link budget |
12 dB |
| Tx power (min) |
-19 dBmW |
Design
| Internal |
N |
| DIN rail mounting |
Y |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
100 Mbit/s |
1 x RJ-45, 1 x SC, 2km Max, Fast Ethernet
- One 10/100 TX port to One 100FX port media converter
- Supports Multi-Forwarding modes – Store and Forward, (Switching Converter) Modify Cut-through, Pure Converter and Converter with Auto Change modes
- Supports Auto MDI/MDI-X, Auto Negotiation
- Supports Multi-mode 2KM, Single-mode 30KM
- Extreme Low Data Forwarding Latency- 1.6 x 10-6 Sec
- Auto Link Loss Forwarding (LLF) for fault detection
- Fault Alert for port and power
- Redundant 10~60V DC Power inputs with DC polarity protection
- Supports AC 1.5KV Hi-Pot isolation protection
- EN 50121-3-2 Railway EMC compliance (applying)
- Operating temperature -25~75°C (-40~75°C wide operating temperature model available by request)