Kramer Electronics WP-230 Grey outlet box

WP-230, 3.5mm, S-Video, 2 x RCA, VGA, RJ-45, 1 x composite Active Wall Plate − Computer Graphics, Composite Video & s−Video & Stereo Audio Line Amplifier with RJ−45 Pass−Through
The WP−230 is a wall plate line driver for computer graphics video signals with resolutions up to and exceeding UXGA, composite video, s−Video (Y/C) signals and stereo audio signals. It provides controls to compensate for signal losses inherent in long cable runs.

- HDTV Compatible.
- High Bandwidth - 520MHz (−3dB) for 15−pin HD, 438MHz (−3dB) for composite video, 155MHz (−3dB) for Y/C.
- Front Panel Connections - 15−pin HD (F) with 3.5mm (F) stereo audio and RCA for composite video; 4−pin mini DIN for Y/C with 2 RCAs for stereo audio inputs; RJ−45 pass−through.
- Rear Panel Connections - 5 BNC (F) for the computer graphics signals; terminal blocks for the composite video and Y/C signals; balanced stereo terminal blocks for each stereo audio signal; RJ−45 pass−through.
- Level (Gain) Control - Line level audio from 2 RCA (F), composite video and s−Video (both Y and C).
- EQ (Peaking) Control - 15−pin HD & composite video.
- Audio Level Controls - Left & right for stereo audio on 2 RCA.
- Dimensions - 6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") W, D, H.
- Wall Plate Size - 1 gang US only.