Security
Active tampering alarm |
Y |
HTTPS encryption |
Y |
IP address filtering |
Y |
Video motion detection |
Y |
Alert notification type |
E-mail |
Motion sensor |
Y |
Networking
Cabling technology |
10/100Base-T(X) |
Ethernet interface type |
Fast Ethernet |
Quality of Service (QoS) support |
Y |
Supported network protocols |
IPv4, IPv6, HTTP, TCP/IP, ICMP, DHCP, DNS, DDNS, RTP, RSTP, RTCP, uPnP, IGMP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1X, QoS, Bonjour |
Image sensor
Optical sensor size |
1/3 " |
Progressive scan |
Y |
Sensor type |
CMOS |
Video
Video compression formats |
H.264, M-JPEG |
Flip & mirror |
Y |
Privacy masking |
Y |
Text caption overlay |
Y |
Noise reduction |
Y |
Full HD |
Y |
Frame rate |
20 fps |
Automatic gain control |
Y |
Image quality adjustment |
Brightness, Contrast, Saturation, Sharpness |
Megapixel |
3 MP |
Design
Weatherproof |
Y |
Protection features |
Vandal-proof |
Form factor |
Dome |
Performance
Preset points |
Y |
Remote viewing |
Y |
Wide Dynamic Range (WDR) |
Y |
Day/night mode |
Y |
PTZ control (Pan/Tilt/Zoom) |
Y |
Type |
IP security camera |
Night vision
Infra-red wavelength |
850 nm |
LED type |
IR |
Night vision |
Y |
Night vision distance |
10 m |
Number of illumination LEDs |
10 |
Lens system
Zoom capability |
Y |
Fixed focal length |
2.8 mm |
Digital zoom |
3 x |
Other features
Browser supported |
Internet Explorer, Chrome, FireFox, Safari |
Storage
Compatible memory cards |
MicroSD (TransFlash), MicroSDHC, MicroSDXC |
Card reader integrated |
Y |
Maximum memory card size |
64 GB |
Camera
Camera shutter speed |
1/30 - 1/100000 s |
Pan range |
-30 - 30 ° |
Field of view (FOV) angle |
98.5 ° |
Tilt angle |
0 - 75 ° |
Power
Power over Ethernet (PoE) |
Y |
Power consumption (max) |
7 W |
System requirements
Minimum RAM |
1000 MB |
Minimum processor |
Intel Pentium IV 3.0 GHz or higher |
Additionally
Password protection |
User |
Ethernet LAN connection |
Y |
Wireless technologies |
Wired |
Rotation |
360 ° |
Ethernet LAN (RJ-45) ports quantity |
1 |
1/3" Progressive Scan CMOS, 2048x1536 3 Megapixel, 0 lx, 10 IR LED 850nm, 2.8 mm, H.264/MJPEG, Ethernet 10/100 Base-T, 12 VDC, IP66, 99.3 x 96.6 x 52.9 mm, 250 g
- Omni IP ‘hand free’ Plug-and-Play system: just connect to PoE switch and stream video
- View and record 3MP resolution at up to 20FPS from 1/3” progressive scan CMOS sensor
- 3MP images contain NINE times the pixel detail versus traditional analog images
- At 3X digital zoom, a 3MP images display more detail than a basic analog camera
- Real time 30FPS streaming at 1920x1080 (1080p)/1280x720 (720p)
- Low light sensitivity of .07lux with
- True Day/Night (ICR) for best daytime color reproduction and low/no light sensitivity
- Low/no light coverage enhanced by 10 IR LEDs with 33 foot range
- Smart IR Control of image contrast despite bright, close in objects in scene
- Extensive OSD capabilities, many controlled directly from Omni IP NVR
- Dual streaming in H.264/MJPEG with fixed/variable bandwidth control from 32Kb/s to 12.3Mb/s
- Region of Interest allocates bandwidth to maximize resolution in priority areas within scene
- Day/night and IR switching control by photo sensor or schedule (or disable IRs if desired)
- In-camera detection of motion, video loss or tampering with alarm reporting to NVR
- 3D DNR improves low light image clarity and reduces bandwidth/NVR disk utilization
- DWDR compensates bright or unbalanced scene lighting
- BLC specifically for handling scenes with back lit subjects
- Lens focal length of 4mm covers 70° field of view; optional 2.8mm lens for wider view or 6mm for greater magnification*
- Dual PoE/12VDC power
- PoE for efficiency and convenience
- 12VDC for legacy system upgrade or beyond PoE cable distance range
- Operate almost anywhere: IP66 weather resistance and -22°F~140°F temperature range
- Low profile housing is adjustable +/- 30° pan, 360° rotatation, and 75° tilt for flexible wall or ceiling mounting; fits single gang electrical box
- Support for Safari/Chrome/FireFox/IE web browsers with free plug-in
- Customize installation with KA-LRTC1 Threaded Cap for Pendant Mount; KA-LRWM1 Wall Mount (special order); KA-BRPM1 Pole Mount; KA-BRCM1 Corner Mount for use with KA-LRWM1