Packaging content
| Quick installation guide |
Y |
| User guide |
Y |
Ports & interfaces
| DC-in jack |
Y |
| Fiber ports quantity |
1 |
Performance
| Wavelength |
1310 nm |
| Wavelength-division multiplexing (WDM) |
Y |
| Rx power (max) |
-3 dBmW |
| Rx power (min) |
-20 dBmW |
| Tx power (min) |
-9.5 dBmW |
| Maximum transfer distance |
10000 m |
| Fiber mode structure |
Single-mode |
| Tx power (max) |
-3 dBmW |
Networking
| Auto MDI/MDI-X |
Y |
| Duplex system |
Full |
| Ethernet LAN data rates |
1000 Mbit/s |
| Auto-negotiation |
Y |
Additionally
| AC adapter bundled |
Y |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
1000 Mbit/s |
PoE Powered Gigabit Ethernet Media Converters 1000BASE-T to 1000BASE-SX/LX
The Gigabit media converter is designed to convert 1000Base-T signals to/from 1000Base-X fiber
signals. It is used to extend the connection distance between two Gigabit Ethernet devices via fiber
cable transparently with no performance degradation. With the SFP (Mini-GBIC) connector design,
the media converter not only supports existing variety of multimode and single mode fibers, but
also preserves the flexibility to adapt to any change of your fiber network in the future. It also
supports center chassis installation with optional power redundancy and management features
when a larger fiber network is required. With pre-configured fiber transceivers, the converter also
can support Bi-Di WDM and CWDM fiber network applications.
Because of 802.3af compliance, the converters can draw the power via Cat.5 cable connected to a
PoE PSE switch or mid-span injector. THis feature makes the converter ideal for remote areas of a
network without AC power outlests.
The 1000BASE-T to 1000BASE-SX/LX media converter series provides1000Mbps Gigabit Ethernet copper-to-fiber media conversion, allowing for 1000Base-T-1000Base-X over multimode or optional single-mode fi-ber optical media.
