Performance
| Tx power (max) |
-4 dBmW |
| Wavelength |
850 nm |
| Wavelength-division multiplexing (WDM) |
Y |
| Rx power (max) |
-1 dBmW |
| Rx power (min) |
-18 dBmW |
| Tx power (min) |
-9.5 dBmW |
| Maximum transfer distance |
500 m |
| Fiber mode structure |
Single-mode |
Packaging content
| User guide |
Y |
| Quick installation guide |
Y |
Networking
| Auto-negotiation |
Y |
| Auto MDI/MDI-X |
Y |
| Duplex system |
Full |
| Ethernet LAN data rates |
1000 Mbit/s |
Ports & interfaces
| DC-in jack |
Y |
| Fiber ports quantity |
1 |
Additionally
| Transfer rate (Mbps) |
1000 Mbit/s |
| AC adapter bundled |
Y |
| Wireless technologies |
Wired |
PoE-PD-enabled 1000Base-T to 1000Base-X Gigabit Media Converters
The Gigabit media converter is designed to convert 1000Base-T signals to/from 1000Base-X fiber signals. It is used to extend the connection distance between two Gigabit Ethernet devices via fiber cable transparently with no performance degradation. With the SFP (Mini-GBIC) connector design, the media converter not only supports existing variety of multimode and single mode fibers, but also preserves the flexibility to adapt to any change of your fiber network in the future. It also supports center chassis installation with optional power redundancy and management features when a larger fiber network is required. With pre-configured fiber transceivers, the converter also can support Bi-Di WDM and CWDM fiber network applications. Because of 802.3af compliance, the converters can draw the power via Cat.5 cable connected to a PoE PSE switch or mid-span injector. THis feature makes the converter ideal for remote areas of a network without AC power outlests.
The 1000BASE-T to 1000BASE-SX/LX media converter series provides1000Mbps Gigabit Ethernet copper-to-fiber media conversion, allowing for 1000Base-T-1000Base-X over multimode or optional single-mode fi-ber optical media.
