Antenna
| Antenna connector type |
SMA |
| Antenna gain level (max) |
5 dBi |
| Antenna type |
External |
| Antennas quantity |
4 |
| Detachable antenna(s) |
Y |
Power
| Power over Ethernet (PoE) |
Y |
| Input voltage |
10 - 28 V |
Performance
| Frequency band |
2.4/5 GHz |
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
| Modulation |
OFDM |
| 2.4 GHz |
Y |
| 5 GHz |
Y |
| VLAN support |
Y |
| Receiver sensitivity |
2.4 GHz:\n\n802.11b: -91 dBm @ 11 Mbps, -96 dBm @ 1 Mbps; 802.11g: -96 dBm @ 6 Mbps, -83 dBm @ 54 Mbps; 802.11n: -96 dBm @ 6,5 Mbps (MCS0, 20\nMHz), -79 dBm @ 65 Mbps (MCS7, 20 MHz); -93 dBm @ 13 Mbps (MCS8, 20 MHz), -77 dBm @ 130 Mbps (MCS15, 20 MHz); -90 dBm @ 15 Mbps\n(MCS0, 40 MHz), -75 dBm @ 150 Mbps (MCS7, 40 MHz); -90 dBm @ 30 Mbps (MCS8, 40 MHz), -73 dBm @ 300 Mbps (MCS15, 40 MHz)\n\n5 GHz:\n\n802.11a/h: -95 dBm @ 6 Mbps, -82 dBm @ 54 Mbps; 802.11n: -95 dBm @ 6,5 Mbps (MCS0, 20 MHz), -77 dBm @ 65 Mbps (MCS7, 20 MHz); -94\ndBm @ 13 Mbps (MCS8, 20 MHz), -74 dBm @ 130 Mbps (MCS15, 20 MHz); -91 dBm @ 15 Mbps (MCS0, 40 MHz), -75 dBm @ 150 Mbps (MCS7,\n40 MHz); -90 dBm @ 30 Mbps (MCS8, 40 MHz), -71 dBm @ 300 Mbps (MCS15, 40 MHz) |
| Channel bandwidth |
20 MHz |
| Firmware upgradeable |
Y |
| Web-based management |
Y |
| Reset button |
Y |
| Quality of Service (QoS) support |
Y |
Protocols
| Supported network protocols |
IPv4/IPv6 |
| Management protocols |
Telnet/SSL, SSH, HTTP/HTTPS, TFTP, SNMP, MIB, MIB II |
| Routing protocols |
RIP-2, RIP-1 |
| DHCP server |
Y |
| DHCP client |
Y |
Security
| Security features |
ACL, NAT, SIF, MS-CHAP, MS-CHAPv2 EAP, PAP, CHAP, MS-CHAP, MS-CHAPv2, PPP |
| Authentication method |
RADIUS, RADSEC, TACACS+ |
| MAC address filtering |
Y |
Ports & interfaces
| WAN connection |
Ethernet (RJ-45) |
| DC-in jack |
Y |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Transfer rate (Mbps) |
1000 Mbit/s |
2.4GHz / 5GHz, 802.11n, 1 x Com-Port, 1 x Fast Ethernet WAN RJ-45, 1 x Gigabit Ethernet RJ-45, PoE (802.3af)
With the LANCOM IAP-322 high-performance WLAN structures can be extended to logistics areas such as warehouses or other roofed outdoor areas. Thanks to the robust full metal housing the device is resistant against dust as occurring in warehouses. The LANCOM IAP-322 is designed to meet any demands in the industry even with regard to its power supply: It can both be operated with the supplied wall plug transformer (230V/12V) and comfortably via PoE based on IEEE 802.3af. Additionally, a multi power supply with 10-28V is available in order to connect the device according to the required conditions on-site. The device can even be installed on forklifts and can hence be used for supporting the automatic stocktaking or for locating the vehicle. Due to the implementation of appropriate electronic components, the device can also be applied in sub-zero temperatures and thus also during winter times in unheated warehouses, sport arenas or ice stadiums without interruption. Professional software features such as Band Steering and Spectral Scan contribute to a reliable WLAN operation even in difficult and high-density radio environments.
