Other features
| Supported data transfer rates |
300bps, 150 Kbps |
| Networking features |
10/100BaseT(X) |
| Supported protocols |
CP/IP, IPX, AppleTalk, NetBIOS/NetBEUI, NDS, NDPS, LAT \nARP, RARP, ICMP, SNMP, BOOTP, DHCP, TFTP, LPR, Telnet, HTTP |
| Data transfer rate |
0.23 Mbit/s |
Ports & interfaces
| Parallel ports quantity |
2 |
| DC-in jack |
Y |
Protocols
| Management protocols |
SNMP, DHCP, Telnet, HTTP |
| Web-based management |
Y |
Networking
| Network connection type |
Ethernet LAN |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
4 ports (2 x RS-232 + 2 x DB25), 1 x RJ-45, 10/100Base-T
Print Server
- Share up to four (4) printers with multiple users
- Connect both parallel and serial (RS-232) printers
- 10/100Base-T Ethernet interface (RJ45)
- Supports multiple operating systems and protocols
- Simple installation with included EZWebCon software
- Web-based management for easy setup
- Flash ROM for easy upgrades
- Built-in universal (95-250VAC, 50/60Hz) power supply
The EPS2-100 Print Server quickly connects to the parallel or serial (RS-232) port on laser, inkjet and even dot matrix printers, enabling multiple users to access and share them over Ethernet.
With an ‘always on and ready’ print server, there’s no need to dedicate a computer to share a printer. Multi-protocol support means that PC, Mac and Linux/Unix users can share a single printer, on the same network. Protocol support includes NetBIOS/NETBEUI, LPR for Windows and Linux/Unix systems, IPX for Novell NetWare, AppleTalk/EtherTalk for Mac OS and LAT for DEC equipment.
Use the included EZWebCon software for quick and easy initial setup. Once installed, the print server can be reconfigured or managed from any computer with a web browser. A command line interface is available via Telnet as an alternative method to configure the unit.
The EPS2-100 print servers are ideal for both small workgroups and large enterprises, providing seamless network printing for all major network protocols and operating systems.
