System requirements
| Linux operating systems supported |
Y |
| Mac operating systems supported |
Mac OS X 10.9 Mavericks |
Technical details
| Filament thickness supported |
1.75 mm |
| Maximum extruder tip temperature |
275 °C |
| Layer thickness (max) |
0.35 mm |
| Model file formats supported |
gcode |
| Layer thickness supported |
0.2, 0.35 mm |
| Layer thickness (min) |
0.02 mm |
| Number of print heads |
2 |
| Printing compartment volume |
13.6 L |
| Heated print platform |
Y |
| Maximum travel speed |
400 mm/sec |
| Maximum build size (WxDxH) |
280 x 270 x 180 mm |
| Maximum vertical build speed |
300 mm/sec |
| Accuracy |
0.0169 mm |
| Step angle |
1.8 ° |
| Nozzle width |
0.35 mm |
Packaging content
| USB flash drive included |
Y |
| Dust cover included |
Y |
Packaging data
| Number of filament rolls included |
7 |
Design
| Built-in display |
Y |
| Viewing window |
Y |
Dual Extruder, Max. print speed - 300 mm/s, Print Volume - 14.1 L., Filament size 1.75 mm, Layer Thickness 0.02 - 0.35 mm, 1 x USB + Starter Value Pack
DUAL EXTRUDER
Our dual extruder allows you to print with two types of materials or colors at the same time, broaden your range of applications. Using two types of material is crucial when printing with support structures. Our water soluble PVA support allows users to rinse away the support structures after printing, leaving a clean and high quality print.
For designers, dual extrusion offers the opportunity to print with two colors in one print. Go ahead: mix and match your MAXX filaments!
LARGEST BUILD VOLUME
The Creatr HS has the largest build volume in its class, with an astonishing volume of 13.6L and the possibility to print objects up to 28cm of length. The big building volume gives you freedom to design, make up-to-scale prototypes and other endless printing possibilities. A whole lot of centimeters fit into our printers, so splitting up your model in multiple parts and reassemble it afterwards, has come to an end. And if your looking for an even bigger volume, take a look at our Creatr HS XL!
If you can design it, you can build it.
HIGH SPEED
HS stands for High Speed. With a print speed up to 300mm/s the Creatr HS will get you your prints extremely fast, without losing accuracy and quality. Use of light material minimizes the weight of the extruder carriage, enabling rapid prototyping and quick results for customers.
STAND ALONE
The Creatr HS is equipped with a 4inch full color LCD screen and only 1 knob to control it. Say goodbye to SD cards, run your Creatr HS simply from a USB stick. Preheat and start printing in less than 10 minutes (USB 3.0 compatible).
STURDY DESIGN
The complete structure of the Creatr HS is made out of standard industrial grade aluminum parts and therefore built to last. The accuracy of the printer is unaffected by temperature changes and does not diminish over time.
STARTER VALUE PACK
Starting with the Creatr HS/HS XL or Xeed has never been so easy. The starter pack provides you with all the tools you will need to get things going. ABS, PLA, PVA filament (a total of 7 rolls), printing stickers, a very convenient toolkit and a custom made dustcover. Enjoy your printing!
SUMMARY
- Creatr High Speed
- 2 packs of Print Stickers
- 4 rolls of MAXX Economy PLA
- 2 rolls of MAXX Economy ABS
- 1 roll of MAXX Economy PVA
- Creatr Software Powered by Materialise
- Creatr toolkit
- Leapfrog USB stick
- Live installation and training
- Online support included in purchase price
- Dustcover
