Display
| Vertical scan range |
50 - 160 Hz |
| Viewable size, horizontal |
325 mm |
| Viewable size, vertical |
244 mm |
| Viewable size diagonal |
406 mm |
| Digital vertical frequency |
50 - 160 Hz |
| Digital horizontal frequency |
30 - 72 kHz |
| Type |
FST |
Operational conditions
| Non-operating relative humidity (non-condensing) |
5 - 95% |
| Operating temperature (T-T) |
32 - 104 °F |
Power
| Monitor maximum power consumption |
75 W |
| Power consumption (off) |
4 W |
Ergonomics
| Swivel angle range |
15 - 5 ° |
| Tilt angle |
90 - 90 ° |
Additionally
| Display scan frequency (horizontal) |
30 - 72 kHz |
43.18 cm (17 ") E75, CRT monitor
-17-inch (432-mm) CRT with a viewable image size of 16.0 inches (406 mm), incorporating a 0.25 dot pitch.
-Maximum horizontal frequency of 72 kHz for flicker-free operation at a recommended 1024 x 768 pels at 85 Hz, with a maximum addressability of 1280 x 1024 pels at 60 Hz.
-VESA DDC capability for Plug and Play and asset tracking for DDC-enabled attaching system unit hardware and software.
-Timings for the VESA 85 Hz refresh rate display modes for 640 x 480, 800 x 600, and 1024 x 768 addressabilities.
-Universal power supply providing worldwide operating capability.
-A minimum of MPR-II compliance.
-Available in business black.
-Multifrequency operation with easy-to-use on-screen display (OSD) user controls.
Acoustics
Declared acoustical noise emissions LWAD = 4.5 Bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10, and reported in conformance with International Organization for Standardization (ISO) 9296.
Packaging
-One monitor with attached video signal cable.
-Attachable tilt-swivel stand.
-A power cord.
-Setup Guide.
-Safety and Warranty Information.
-CD-ROM with multilingual User's Guide and monitor installation files.
-An attached video signal cable is supplied. It is 1.5-meters (4.9-ft) long with a 15-pin, mini D-shell connector.
A separate signal cable adapter (96G2693) is required to provide "1010" ID bits at the monitor interface for those systems that require ID bits.
