Networking
| Auto-negotiation |
Y |
| Flow control support |
Y |
| Packet forwarding rate (100 Mbps) |
148810 pps |
| Packet forwarding rate (10 Mbps) |
14880 pps |
| Auto MDI/MDI-X |
Y |
| Duplex system |
Half, Full |
| Store-and-forward |
Y |
| Ethernet LAN data rates |
10, 100 Mbit/s |
Design
| DIN rail mounting |
Y |
| Internal |
N |
Power
| Power consumption (max) |
4.32 W |
| Output current (12V) |
0.36 A |
| Output current (48V) |
0.09 A |
| Input voltage |
10-48 V |
Packaging content
| Quick installation guide |
Y |
Certificates
| Safety |
Class 1, Division 2 group A,B,C&D UL60950-1, EN60950-1, IEC60950-1 |
Performance
| Buffer size |
128 KB |
| Maximum transfer distance |
40000 m |
| Fiber mode structure |
Single-mode |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
100 Mbit/s |
10/100BASE-TX, 100BASE-FX, IP30, 40 KM, 800 g
LevelOne IEC-1040 is an industrial Fast Ethernet media converter with a rugged aluminum case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes.
- 100Base-FX Single-mode fiber for the link up to 40km
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in hazardous locations with DC Terminal Block power
- DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode
- 128K bits buffer memory
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- 40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F)
- IP30 aluminum case
- Supports DIN-rail installation
