Video
| Analog signal format system |
NTSC, PAL |
| Frame rate |
30 fps |
Networking
| Cabling technology |
10/100Base-T(X) |
| Wi-Fi |
N |
| Supported network protocols |
TCP/IP, HTTP, HTTPS, DHCP, NTP, SMTP, UPnP, FTP, RTP/RTSP |
Image sensor
| Optical sensor size |
1/4 " |
| Sensor type |
CMOS |
Storage
| Internal memory |
32 MB |
| Flash memory |
4 MB |
| Built-in hard drive |
N |
Camera
| Minimum illumination |
0.5 lx |
Power
| Power over Ethernet (PoE) |
Y |
| DC-in jack |
Y |
Performance
| PTZ control (Pan/Tilt/Zoom) |
Y |
Other features
| Networking features |
Fast Ethernet |
Additionally
| Ethernet LAN connection |
Y |
| Wireless technologies |
Wired |
FCS-3031 PIR PoE Dome Network Camera
- High-quality Progressive 1/4” CMOS image sensor at VGA (640x480) resolution
- Provide MPEG4 Simple Profile and MJPEG video streams simultaneously (up to 30fps)
- Supports analog output (NTSC/PAL) for installation purpose
- Hardware 128-bit AES and 64-bit DES/3DES data encryption
- Supports dual directions voice (G.726 at 8K sampling rate and 16K bit rate) in full duplex
- Supports up to 10 viewers simultaneously
- Motion Detection by analyzing the video stream
- Supports HTTP streaming in MPEG4 and MJPEG video format
- Provide 1 additional 160x120 MPEG4 video stream for cell phone access (through RTP)
- Built-in PIR Sensor for Motion Detection
Product Overview
FCS-3031 is a Dome Type PoE Network Camera for consumer markets. This IP Camera comes with a highquality progressive 1/4” CMOS sensor. It also streams real-time audio and video in MPEG4/MJPEG video compression formats over a PoE enabled LAN network or in 3GPP compression format for streaming over a 3G mobile network.
Powerful, feature rich PoE IP Network Camera
Despite its compact size, FCS-3031 features fixed focus lens, two-way audio capability, and excellent video quality. IEEE 802.3af PoE compliant, users can install the camera without concerns about the power outlet located near the camera for easy deployment of a PoE enable LAN network.
Passive InfraRed (PIR) Sensor
When people pass by or in an emergency situation, the built-in PIR motion detection sensor will “detect” and start recording automatically, which is able to detect movement up to 5 meters away. When motion is detected at the specified regions, the additional function of alarm notification can send an E-mail alert or send captured images via FTP upload to a designated storage server.
Bundled LevelOne IP CamSecure Lite
FCS-3031 comes bundled with the LevelOne IP CamSecure Lite Surveillance Management Software. This allows users to monitor cameras up to 32 channels simultaneously.
