Networking
Cabling technology |
10/100Base-T(X) |
Wi-Fi |
N |
Supported network protocols |
IPv4,TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE |
Image sensor
Optical sensor size |
1/4 " |
Sensor type |
CCD |
Video
NTSC resolutions |
704 x 480 pixels |
PAL resolutions |
704 x 576 pixels |
Frame rate |
30 fps |
Storage
Internal memory |
64 MB |
Flash memory |
8 MB |
Built-in hard drive |
N |
Camera
Camera shutter speed |
1/1 - 1/10000 s |
Minimum illumination |
0.01 lx |
Pan speed |
240 °/sec |
Tilt speed |
120 °/sec |
Pan range |
0 - 360 ° |
Camera shutter type |
Electronic |
Tilt angle |
0 - 90 ° |
Lens system
Focus adjustment |
1.6 - 4.5 |
Digital zoom |
12 x |
Focal length range (f-f) |
3.4 - 122.4 mm |
Power
Power over Ethernet (PoE) |
Y |
DC output current |
4 A |
DC-in jack |
Y |
Performance
PTZ control (Pan/Tilt/Zoom) |
Y |
Additionally
Ethernet LAN connection |
Y |
Wireless technologies |
Wired |
Ethernet LAN (RJ-45) ports quantity |
1 |
FCS - 4500 - 704 x 576 1.4” CCD, 1/1 - 1/10000s, 52dB, 6500g, Black/Grey
- 36x Optical and 12x Digital zoom;
- Supports 360° pan and 90° tilt;
- Supports simultaneous MPEG-4/M-JPEG dual-streaming;
- Automatic IR-cut filter for Day/Night viewing;
- Extended I/O for sensor & alarm;
- Provides BNC video output for CCTV system;
- Two-way audio;
- Free software included (Industry-leading 64-channel IP CamSecure software).
Product Overview
The LevelOne FCS-4500 Day/Night Pan/Tilt/Zoom IP Speed Dome Camera is an intelligent highspeed dome camera equipped with an auto focus DSP camera, adjustable pan/tilt/zoom motor, and a digital decoder.
IR cut-off filter
With the IR filter in place, true color imagery is captured during day time and when light conditions turns poor, the IR filter is automatically removed for clear night time imagery in black and white.
Intelligent Speed Dome Camera
With Focus/PRM auto matching technology, the FCS-4500 enables camera users to monitor and zoom on specific targets without losing the target while panning and zooming. By utilizing a precise step-motor, the FCS-4500 makes for a very stable, smooth pan and tilt and accurate positioning surveillance camera.
Preset positioning
FCS-4500 supports a 32-preset positioning memory. Users can preset and recall programmed positioning through software commands. A maximum of 4 navigation groups with 8 preset positions are supported with adjustable time lapses of between 1 to 60 seconds between positions.
Free Bundled Software
The free bundled 64-channel software package, IP CamSecure, allows for simultaneous monitoring of 64 IP Cameras. Other features include automatic snapshot, recording of streaming video, motion detection and pre/post event buffer.