Networking
| Network connection type |
Ethernet LAN |
| Ethernet LAN data rates |
100, 10, 1000 Mbit/s |
Protocols
| Supported network protocols |
TCP/IP IPv4, IPX/SPX, AppleTalk, LexLink (DLC), TCP/IP IPv6, TCP, UDP |
| Management protocols |
HTTP, HTTPs (SSL/TLS), SNMPv3, WINS, SLPv1, IGMP, BOOTP, RARP, APIPA (AutoIP), DHCP, ICMP, DNS, SNMPv2c, Bonjour, DDNS, mDNS, ARP, NTP, Telnet, Finger |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
C925 MarkNet N8120 Gigabit Ethernet Print Server
<b>Compatible with most networks</b>
An internal print server to connect a printer to most major networks using Ethernet with a RJ-45 connector. Supports Gigabit Ethernet networks as well as 10BaseT and 100BaseT (Fast Ethernet) networks.
<b>Network Communications Security</b>
SNMPv3, IPSec and 802.1x authentication provide security measures for communications and data encryption in supported printers and MFPs.SNMPv3 supports encrypted and authenticated management traffic protecting remote configuration and device status messages.IPSec can be used with both TCP/IP IPv4 and IPv6 networks and provides encryption and authentication of communications at the network layer.
<b>Simple to set up</b>
Management is simplified by network settings that can be established either automatically or remotely - configure using MarkVision, command line or the GUI utilities.
<b>Easily upgradeable</b>
The firmware resides in flash memory which allows upgrades via software download. Firmware upgrades are flashable and can simultaneously address multiple devices. The embedded web page allows administrators to flash update printer firmware or access printer settings using a web browser to easily monitor printer status and change default settings.
<b>Network Protocol Support</b>
MarkNet print servers and the standard Ethernet connection support these protocols: TCP/IP IPV4, TCP/IP IPv6, Novell (IPX/SPX including NetWare Directory Services), AppleTalk™ and LexLink (DLC/LLC). All protocols can be active simultaneously. Simultaneous protocol support allows you to print from different systems without reconfiguring the print server.
