Power
| Power consumption (max) |
6 W |
| Power over Ethernet (PoE) |
Y |
| Input voltage |
100 - 240 V |
Performance
| Maximum outdoor range |
5000 m |
| Quality of Service (QoS) support |
Y |
| Frequency band |
2.402 - 2.492 GHz |
| Bandwidth |
2.4 GHz |
| 5 GHz |
N |
| Operating modes |
Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT) |
| High power |
Y |
| Transmitting power |
28 dBmW |
| Receiver sensitivity |
-95 - -76dBm |
| Ethernet LAN data rates |
10, 100 Mbit/s |
| Modulation |
16-QAM, CCK, 64-QAM, DQPSK, BPSK, DBPSK, QPSK |
| 2.4 GHz |
Y |
Protocols
| DHCP server |
Y |
| DHCP client |
Y |
| Supported network protocols |
IPv4, IPv6 |
| Management protocols |
HTTP(S) GUI, SSH, SNMP, WNMS, Telnet |
Antenna
| Antenna gain level (max) |
9 dBi |
| Integrated antenna |
Y |
| Antennas quantity |
1 |
Ports & interfaces
| WAN connection |
Ethernet (RJ-45) |
Additionally
| AC adapter bundled |
Y |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Transfer rate (Mbps) |
300 Mbit/s |
802.11b/g/n, 2.402-2.492GHz, 28dBm, 10/100 Base-T RJ-45, 5/10/20/40MHz
<b>New Hardware platform</b>
Powerful new generation CPU ensures better performance delivering higher up to 170 Mbps capacity and almost 2 X higher packet per second rate (80000). Narrow (5 and 10 MHz) channel support ensures steady performance in noisy environments. More RAM improves the performance with multiple users connected to a single base-station and larger flash stores a 2nd failover firmware image.
<b>Integrated surge protection</b>
3 kV line to ground and 1 kV line-to-line protection allows operating in a harsh weather conditions and unstable electrical installations.
<b>New OS</b>
New operating system includes all the essential features for point-to-multipoint networks. User interface is built using HTML 5 technology with responsive design. Among the new features there are IPv6 bridge and router support, SSDP and Bonjour device discovery options, flexible traffic shaping and SSTP client. New generation DLB devices are backwards compatible with APC series from Deliberant even when using iPoll protocol. In order to achieve this a new firmware image has to be installed on all APC devices (v7.0 or later).
<b>iPoll 2 – enhanced performance protocol</b>
iPoll 2 uses a centralized control scheme, where the base station polls every subscriber station (CPE) and ensures smooth packet transmission for voice, video and data. The polling method is smart: stations having data are polled more often versus idle ones.
<b>Hotspot scenario support</b>
Starting from v7.52 Infinity firmware image can be used on a LigoDLB series devices for the outdoor hotspot and other related applications. After the firmware upgrade DLB devices are converted into access points for outdoor hotspot networks and will lose the functionality of point-to-point or point-to-multipoint connectivity.
<b>WNMS</b>
WNMS is a FREE enterprise grade Wireless Network Management System. A single software solution simplifies a large number of management and monitoring tasks for the network administrator.
<b>LinkCalc</b>
LigoWave‘s link calculator is a link planning tool available online
