Data transmission
| MAC address table |
8000 entries |
| Supported data transfer rates |
10/100 Mbps |
| Maximum data transfer rate |
3.2 Gbit/s |
Other features
| Non-operating relative humidity (non-condensing) |
10 - 90% |
| Connectivity LEDs |
Y |
| Networking features |
Ethernet |
Networking
| Auto MDI/MDI-X |
Y |
| Full duplex |
Y |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
16 |
| DC-in jack |
Y |
| Copper ethernet cabling technology |
100BASE-TX, 10BASE-T |
Power
| Input voltage |
3.3 V |
| Input current |
4 A |
Operational conditions
| Operating temperature (T-T) |
32 - 104 °F |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
Additionally
| Wireless technologies |
Wired |
16x 10/100 Switch, IEEE802.3, IEEE802.3u, IEEE802.3x, MDI/MDI-X, Full Duplex
The LCS-FS8116 Switch has 16 ports with 10/100Mbit/s, all 16 ports have Auto-negotation and Auto MDI/MDI-X. The Switch is suitable for all situations, like small workgroups, segments in a net or for multimedia applications. The feature of Auto-Negotation is the optimized solution to connect
netstructures with 10Mbit/s or 100Mbit/s. The built in Store-and-Forward technic and the CRC Packagecontrole gives you a fast data rate with filtering of failure data. The Full-Duplex Mode enables you to send and receive data at the same time. The Switch is very silent due to the lack of a fan.
Features:
- Complies with 10BASE-T, IEEE 802.3 standard;
- Complies with 100BASE-TX, IEEE802.3u standard;
- Connector: 16x RJ-45 for 10BASE-T and 100BASE-TX;
- Supports Full- and Half-Duplex Operations on all ports;
- Supports Auto MDI-/MDI-X;
- Supports Back-Pressure in Half-Duplex Mode and Flow-Control on IEEE 802.3u;
- Store-and-Forward architecture is filtering fragments and CRC error pakets;
- Rich LED Display for fast diagnostics;
- 8,5” Case (optional 19“ Rackmount).
