Data transmission
MAC address table |
1000 entries |
Supported data transfer rates |
10/100 Mbps |
Maximum data transfer rate |
0.1 Gbit/s |
Other features
Connectivity LEDs |
Y |
Non-operating relative humidity (non-condensing) |
10 - 90% |
Networking
Auto MDI/MDI-X |
Y |
Full duplex |
Y |
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity |
8 |
DC-in jack |
Y |
Performance
Packet buffer memory |
0.75 MB |
Stackable |
N |
Power
Input voltage |
48 V |
Input current |
1.35 A |
Operational conditions
Operating temperature (T-T) |
32 - 104 °F |
Power over Ethernet (PoE)
Power over Ethernet (PoE) |
Y |
Additionally
Wireless technologies |
Wired |
4+4 10/100 PoE Switch, IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3af, MDI/MDI-X, Full Duplex
The device is a powerful, high-performance Fast Ethernet switch, with all 8 ports capable of 10 or 100Mbps auto-negotiation operation (NWay) which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps network with no pain.
This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-and-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of individual port and whole system.
- Complies with 10BASE-T specifications of the IEEE802.3 standard;
- Complies with 100BASE-TX specifications of the IEEE802.3u standard;
- Compliant with IEEE 802.3af PoE standard (DTE power via MDI);
- Provides 4 PoE ports with classification identify;
- Supports 15.4W maximum per PoE port;
- Supports over current protection and circuit shorting protection;
- 8x RJ-45 ports for 100BASE-TX and 10BASE-T connectivity;
- Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection;
- Supports MDI/MDI-X auto crossover;
- Wire-speed packet filtering and forwarding rate;
- Store-and-forward architecture filters fragment & CRC error packets;
- Supports 1K MAC entries;
- 768K Bits buffer memory;
- Supports extensive LED indicators for network diagnostics;
- Internal universal switching power supply;
- FCC Class A, CE, VCCI Class A.