Design
| Minimum age |
15 year(s) |
| Number of pieces |
1 pc(s) |
Heavy Ore Locomotive
Prototype: Swedish State Railways (SJ) class Dm heavy ore locomotive as a 2-part side rod electric locomotive. Used on the ore line Lulea - Kriruna - Narvik. Series 1200 with road numbers 1205+1206. Brown basic paint scheme, large headlights, engineer's cab doors in the old arrangement, large snowplows (Norrland plows) and SAB rubber spring wheels. The locomotive looks as it did around 1965, before the installation of the middle part.
Model: The locomotive has the new mfx+ digital decoder and extensive sound functions. It also has 2 controlled, high-efficiency propulsion systems with flywheels, 1 motor in each locomotive unit with an engineer's cab. All 4 driving axles powered in each locomotive unit with an engineer's cab. Traction tires. The dual headlights and a red marker light change over with the direction of travel, will work in conventional operation, and can be controlled digitally. An additional third wide beam headlight above on the locomotives can be controlled digitally. The engine room lighting as well as the cab lighting in Engineer's Cabs 1 and 2 can each be controlled separately in digital operation. An additional marker light can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. This locomotive has highly detailed metal construction with many separately applied details. The roof equipment is detailed with large vent attachments and compressed air tanks. Both locomotive units are permanently coupled together. There is a close coupling mechanism between the locomotive units. Marker signs for the front end of the locomotive are included separately. Length over the buffers 29.2 cm / 11-1/2".
- Equipped with the new mfx+ digital decoder.
- Operation possible in beginner, advanced, and expert modes.
- Simulated operating supplies usage.
- Realistic running characteristics such as constant speed.
- Simulated engineer's cab in the Central Station 2 display.
- Control of the model in the cab mode by means of the touchscreen on the Central Station 2.
- These new functions are only available in conjunction with the Central Station 2 starting with firmware Version 3.0.
