Makita HR4010C 480RPM rotary hammer

480rpm, 2750bmp, 4.5 m/s2, 9.5J, SDS-Max, 106dB, LED, 14.8lbs <b>Anti-Vibration Technology for 2X Less Vibration</b>

- Powerful 11.0 AMP motor; efficient 1,350-2,750 BPM to handle the most demanding applications
- Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater efficiency
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- Variable speed control dial enables user to match the speed to the application for greater versatility
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Automatic brush cut-off protects commutator from damage for longer tool life
- 2-mode operation for "Hammering Only" or "Hammering with Rotation"
- One-touch sliding chuck for quick bit changes
- Lock-on slide switch for continuous operation ("Hammering Only" mode)
- Ergonomic soft grip provides more comfort and control
- Externally accessible brushes for greater serviceability
- 16.4 ft. jobsite cord for greater versatility and instant power
- Accepts SDS-MAX bits