Marmitek PC INTERFACE remote control

PC INTERFACE CM11 - Switch your modules exactly the way you want: The CM11 Computer Interface is an intelligent controller to switch Marmitek
X-10 Modules on and off. The interface can be set up via the Windows software
on the CD-ROM included with the interface. After set-up, the data is saved in
the interface and the PC can be switched off.

Several programming options. The timer can be programmed for every module
for one day, week, a specific time period or a whole year. Automatic adjustment for daylight savings time. Calculates sunrise and sunset according to geographic location. Several settings per module possible. For lights that are connected to lamp modules the light level can be pre-programmed in percentages.
Can ‘learn’ the ‘lifestyle’ of the user. The two-way interface reads and emembers the commands from remote controls, wireless switchers etc. via the mains. This lifestyle can be imitated in times of absence, including natural
variations in time. Ideal for security during absence.
The software is ideal for setting up macros, a combination of actions. With these macros you can automate actions such as coming home, going to bed, leaving the house, etc. Actions can be executed with a delay up to 4 hours after
activating the macro. All settings are programmed in the permanent memory of the interface (EEPROM) and will not be lost if there is a
power failure.

The interface is connected to a serial PC port. A connection cable with 9-pole D connector is supplied with the interface.