Performance
| Receiver sensitivity |
-20 dBm |
Ports & interfaces
| Host interface |
PCI |
| Internal |
Y |
Networking
| Flow control support |
Y |
| Maximum operating distance |
5000 m |
| Chipset |
Moxa |
Other features
| Operating temperature (T-T) |
32 - 131 °F |
Additionally
| Wireless technologies |
Wired |
2-port Universal PCI serial over fiber board with multi-mode fiber for 5 km transmission (ST connector)
The CP-102UF Universal PCI boards are designed for industrial automation applications that require a long distance, multi-point, PC-based data acquisition solution. The boards are compatible with all popular operating systems, and each of the 2 serial ports support data rates up to 921.6 Kbps. In addition, the CP-102UF boards work with both 3.3V and 5V PCI buses, allowing them to be installed in virtually any available PC server.
With a maximum data transmission distance of 40 km (with the single-mode model), the CP-102UF cards beat the 15 meter maximum for RS-232, and even the 1.2 km maximum for RS-422/485. For many industrial applications, an even bigger benefit is that optical fiber isolates the data from dangerous increases in ground potential, ground loops, and electrical EMI/RFI electromagnetic radiation.
- Extend serial transmission distance up to:
- 40 km with single-mode (CP-102UF-S-ST)
- 5 km with multi-mode (CP-102UF-M-ST)
- Supports"Ring"and"Point-to-Point"transmission modes
- 921.6 Kbps maximum baudrate for super fast data transmission
- 128-byte FIFO and on-chip H/W, S/W flow control
- Compatible with 3.3/5V PCI and PCI-X
- Drivers provided for Windows (2000, XP/2003/Vista/2008 x86/x64), Windows XP Embedded, Windows CE 5.0/6.0, DOS, Linux 2.4, Linux 2.6 (x86/x64), QNX 6, SCO OpenServer 5/6, UnixWare 7
- Easy maintenance with on-board LED display and management software
- Immune from signal interference
- Guards against electronic degradation and chemical corrosion
- Wide temperature model available for -40 to 85°C environments.
