Data transmission
| Store-and-forward |
Y |
| Switching capacity |
1 Gbit/s |
| Maximum data transfer rate |
16 Gbit/s |
Networking
| Rate limiting |
Y |
| Link aggregation |
Y |
| Port mirroring |
Y |
| Flow control support |
Y |
| DHCP client |
Y |
| DHCP server |
Y |
| Full duplex |
Y |
Management features
| System event log |
Y |
| MIB support |
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1,2,3,9 |
| Quality of Service (QoS) support |
Y |
Other features
| Installed ports |
1 |
| Wi-Fi |
Y |
| Data transfer rate |
2.5 Mbit/s |
Ports & interfaces
| Console port |
RS-232 |
| Basic switching RJ-45 Ethernet ports quantity |
1 |
| DC-in jack |
Y |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
EDS-518A Series, 16+2G-Port Gigabit Managed Redundant Ethernet Switch
- Industrial Networking Capability
- Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP (IEEE802.1W/D)
- IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
- IEEE802.1Q VLAN and GVRP protocol to ease network planning
- QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism
- 802.3ad, LACP for optimum bandwidth utilization
- IEEE802.1X and https/SSL to enhance network security
- SNMP V1/V2c/V3 for different levels of network management
- RMON for efficient network monitoring and proactive capability
- Designed for Industrial Applications
- Bandwidth management prevents unpredictable network status
- Supports ABC-01 (Automatic Backup Configurator) for system configuration back up
- Lock port for authorized only MAC address access
- Port mirroring for online debugging
- Automatic warning by exception through email, relay output
- Digital inputs to integrate sensors and alarms with IP networks
- Automatic recovery of connected device's IP addresses
- Line-swap fast recovery (patented)
- Redundant, dual DC power inputs
- IP30, rugged high-strength case
- Long-haul transmit distance of 40 km or 80 km
- DIN-Rail or panel mounting capability
- Send ping commands to identify network segment integrity
- Redundant 12-45 VDC power inputs and over current protection
