Other features
| Supported network protocols |
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP |
| Sensor type |
J/K/T/E/R/S/B/N TC, mV mode |
| Electrostatic Discharge (ESD) protection |
15 kV |
| Accuracy |
+/-0.1% FSR @ 25°C\n+/-0.3% FSR @ 60°C\n+/-0.3% FSR @ -10°C |
| Signal direction |
Input/output |
| Resolution |
16 bit |
| Conversion time |
90 ms |
| Serial interface type |
RS-485 |
| Power consumption |
282 mA |
| Input impedance |
1000000 Ω |
| Channel type |
Sink |
Features
| Channels quantity |
12 channels |
| Isolation |
3 kV |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
ioLogik E2262, Active Ethernet I/O w/ 8 x Thermocouple inputs, 4 x DOs
<b>Active Ethernet I/O with 8 thermocouple inputs and 4 digital outputs</b>
Moxa's ioLogik E2262 is a new type of active micro controller that can be used as an RTU (Remote Terminal Unit). Active Ethernet micro controllers are a kind of PC-based data acquisition and control device that use proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa's Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Active Ethernet micro controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
<b>Features and Benefits:</b>
- Front-end intelligence that supports 24 Click&Go™ rules;
- Active Messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email;
- Supports SNMPv1/v2c/v3 protocol;
- I/O peer-to-peer function;
- Built-in web console;
- PC utility: Auto detection of installed modules;
- Windows/WinCE VB/VC.NET and Linux C APIs.
