Technical details
| Stop bits |
1.5, 2, 1 |
| Auto MDI/MDI-X |
Y |
| Baud rate |
921.6 Kbit/s |
| Flow control support |
Y |
| Isolation |
1.5 kV |
| Ethernet LAN data rates |
10, 100 Mbit/s |
Protocols
| Supported network protocols |
ICMP, ARP, IPv4, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP |
Management features
| Management protocols |
Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Internal RAM |
4 MB |
Starter kit for the MiiNePort E3-H, 32-bit ARM Core, 4 MB RAM, 2 MB Flash, 10/100M, RJ45, 50 bps - 921.6 Kbps, 0 - 55°C
Moxa’s MiiNePort E3 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.
- IEEE 802.3af compliant PoE pass-through
- Use Moxa’s high quality and reliable second generation MiiNe SoC
- Versatile choice of operation modes fulfill specific application requirements
- Green design with extremely low power consumption
- MiiNePort NetEZ Technology makes integration incredibly easy
- Highly compact embedded device module
