Power
| Input voltage |
12 - 48 V |
| Power consumption |
1350 mA |
Technical details
| Isolation |
3 kV |
| Stop bits |
2, 1.5, 1 |
| Ethernet LAN data rates |
10, 100 Mbit/s |
| Baud rate |
921.6 Kbit/s |
Design
| Safety |
UL 60950-1, EN 60950-1, CCC (GB9254, GB17625.1) |
Protocols
| Supported network protocols |
TCP, UDP, IPv4, IPv6, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP |
Processor
| Built-in processor |
Y |
| Processor frequency |
533 MHz |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
3 |
Intel XScale IXP435, 533 MHz, DDR2 SDRAM, 256 MB, 200 x 57 x 120 mm, 1kg, -40 to 75°C, Windows Embedded CE 6.0
<b>Overview</b>
The UC-8416 series embedded computers come with 8 RS- 232/422/485 serial ports, 3 Ethernet ports, 2 CAN ports, 8 Ethernet ports, 12 digital input channels, 12 digital output channels, a CompactFlash socket, and 2 USB 2.0 hosts.
The computers use the Intel XScale IXP435 533 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 16 MB NOR Flash ROM and 256 MB SDRAM give you enough memory to run your application software directly on the UC-8418, and the 32 MB NAND Flash can be used to provide additional data storage. Moreover, the 256 KB SRAM offers a better data retention mechanism for avoiding data loss. These computers come with various communication interfaces, such as serial ports, Ethernet ports, CAN ports, and digital input/output channels, making them ideal as a communication platform for industrial applications that require network and device communications.
The UC-8416 Series comes with the Linux 2.6 or Windows CE 6.0 platform pre-installed to provide an open software operating system for software program development. Software written for a desktop PC can be easily ported to the UC-8416 Series platform by using a common compiler, without needing to modify the code. making these computers an optimal solution for use with industrial applications, but with minimal cost and effort.
In addition to the standard model, a -40 to 75°C wide temperature model is also available for harsh industrial environments.
