Security
Active tampering alarm |
Y |
IP address filtering |
Y |
Video
Video compression formats |
M-JPEG |
NTSC resolutions |
704 x 480 pixels |
PAL resolutions |
704 x 576 pixels |
Maximum video resolution |
4CIF pixels |
Maximum frame rate |
30 fps |
Technical details
Zoom capability |
Y |
Safety |
UL508 |
Frame rate |
25 fps |
PTZ control (Pan/Tilt/Zoom) |
Y |
Wall mountable |
Y |
Ports & interfaces
Line-in |
Y |
Line-out |
Y |
BNC input ports |
4 |
Networking
Wi-Fi |
N |
Supported network protocols |
TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS |
System requirements
Minimum RAM |
512 MB |
Minimum processor |
Pentium 4, 2.4 GHz |
Additionally
Password protection |
User |
RS-232 port |
1 |
Ethernet LAN (RJ-45) ports quantity |
2 |
Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2x 10/100BaseT(X) port, -30 - 70°C operating temperature
The VPort 354 is a high performance, 4-channel industrial video encoder that provides up to 4CIF full frame rate performance (NTSC: 704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and supports a dual MJPEG/MPEG4 algorithm, making it especially well- suited for use with distributed surveillance systems in critical industrial applications. In addition to the rugged-design features, the Modbus/TCP and serial-to-Ethernet connectivity make the VPort 354 more suitable for industrial applications. The two built-in Ethernet ports can be cascaded as a daisy-chain or used for port redundancy, making network communication more safe and reliable. To prevent video loss when the network is down, the VPort 354 can automatically record video on an SD card, and once the network is back up, the recorded video can be downloaded via FTP access.
Rugged Design for Mission-critical Industrial Environments
- -30 to 70°C wide operating temperature
- Built-in single-mode or multi-mode fiber optic Ethernet port—media converter not required
- 2 Ethernet ports for cascade and port redundancy
- 1 RS-232/422/485 COM port for controlling external serial devices over Ethernet (Pending)
- Redundant 12/24 VDC and 24 VAC power inputs for greater reliability
- Metal housing with IP30 protection against dust
- DIN-Rail mounting installation for industrial environments
- UL508 certification (Pending)
- Meets NEMA TS2, Section 2 requirements (Pending)
Advanced Network Protocols Support Efficient Network Transmission and Integration
- Modbus/TCP for easy communication with SCADA software
- Standard RTSP (real-time streaming protocol) video streaming for easy integration
- Multicast (IGMP) protocols for efficient network transmission
- SNMPv1/v2c/v3 MIB-II for easy network management
- QoS (ToS) for configuring the transmission priority of video streams
- UPnP, DDNS, and IP filtering supported