Technical details
| Ethernet LAN data rates |
10, 100 Mbit/s |
| Auto MDI/MDI-X |
Y |
| Flow control support |
Y |
| Modulation |
OFDM, DSSS |
| Stop bits |
2, 1.5, 1 |
| Serial ports quantity |
1 |
| Isolation |
1.5 kV |
Antenna
| Antenna connector type |
Reverse SMA |
Protocols
| Supported network protocols |
ICMP, IPv4, TCP, UDP, DHCP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, SNTP, SSH, HTTPS, ARP |
Management features
| Management protocols |
SNMP MIB-II |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
RJ45, 10/100 Mbps, 802.11a/b/g/n, RS-232/422/485
- Link any serial or Ethernet device to an IEEE 802.11a/b/g/n network
- 921.6 kbps baudrate for RS-232/422/485 transmissions
- Web-based configuration using built-in Ethernet or WLAN
- Enhanced surge protection for serial, LAN, and power
- Remote configuration with HTTPS, SSH
- Secure data access with WEP, WPA, WPA2
- Fast automatic wireless fast roaming
- Offline port buffering and serial data log
- Dual power inputs (1 screw-type power jack, 1 terminal block)
- Supports wireless clients
The NPort® W2150A and W2250A are the ideal choice for connecting your serial or Ethernet devices, such as PLCs, meters, and sensors, to a wireless LAN. Your communications software will be able to access the serial devices from anywhere over a wireless LAN. Moreover, the wireless device servers require fewer cables and are ideal for applications that involve difficult wiring situations. In Infrastructure Mode or Ad-Hoc Mode, the NPort® W2150A and NPort® W2250A can connect to Wi-Fi networks at offices and factories to allow users to move, or “roam,” between several APs (Access Points), and offer an excellent solution for devices that are frequently moved from place to place.
