Data transmission
| MAC address table |
8000 entries |
| Supported data transfer rates |
10/100 Mbit/s |
| Maximum data transfer rate |
1 Gbit/s |
Ports & interfaces
| SFP/SFP+ slots quantity |
2 |
| Basic switching RJ-45 Ethernet ports quantity |
48 |
| SFP module slots quantity |
2 |
| Gigabit Ethernet (copper) ports quantity |
2 |
| Copper ethernet cabling technology |
1000BASE-T, 100BASE-TX, 10BASE-T |
Other features
| Bandwidth |
13.6 Gbit/s |
| Dimensions (WxDxH) |
440 x 205 x 43 mm |
Networking
| Port mirroring |
Y |
| Full duplex |
Y |
| Link aggregation |
Y |
| Spanning tree protocol |
Y |
| Networking standards |
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Flow control support |
Y |
| DHCP client |
Y |
| 10G support |
N |
Power
| Power consumption (typical) |
21 W |
| AC input voltage |
100-240 V |
| AC input frequency |
50/60 Hz |
Performance
| Packet buffer memory |
0.128 MB |
| Mean time between failures (MTBF) |
59880 h |
| Firmware upgradeable |
Y |
Protocols
| Management protocols |
SNMP |
Weight & dimensions
| Depth |
205 mm |
| Width |
440 mm |
| Weight |
3200 g |
| Height |
43 mm |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
Management features
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
Operational conditions
| Storage temperature (T-T) |
-20 - 70 °C |
| Storage relative humidity (H-H) |
95% |
Additionally
| Colour of product |
Black |
| Operating temperature range (T-T) |
0 - 40 °C |
FS750T2 - ProSafe™ 48 Port 10/100 Smart Switch + 2 Gigabit Ports
High Port Density, Gigabit Capability, and Easy Browser-based Management
NETGEAR has packed a lot of value into this high density switch. Start with high port density in a one unit box, add two gigabit uplinks to give an added edge to any growing business, then add key switch management capabilities and you have a powerful switch that costs a lot less than you'd expect.
Forty-eight 10/100 Mbps ports and two copper Gigabit Ethernet ports connect to servers or a Gigabit-speed backbone for a non-stop, always available 10/100/1000-enabled network that can quickly deliver large multimedia, image, and video files. All 50 shielded RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link. Two hot-swappable Small Form-factor Pluggable (SFP)** GBIC slots provide optional fiber connectivity for greater distance.
In addition, an intuitive, Web-browser interface offers the simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. Alternatively, use SNMP-based software to manage your Smart Switch.*** Shipped ready for use straight out of the box, it delivers switching that's easy to set up and use. NETGEAR ProSafe Smart Switches are ideal for adding basic management to your unmanaged networks and extending your managed networks.
Powerful
Forty-eight 10/100 ports and two Gigabit ports deliver non-blocking, full-speed packet forwarding from the edge of your network to the core. Two SFP GBIC fiber slots provide optional fiber connectivity for greater distance.
Intelligent
Smart Switch capability enables the most key management features for the price of an unmanaged switch. Included are performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization.
Right Sized
Ideal for growing businesses who want the benefits of management without the cost and complexity of a managed network.
Well Designed
LEDs located on the front panel make switch status easy to observe and troubleshooting easy to accomplish. Made to last, this durable switch is housed in a 17-inch metal box and comes with a rack mounting kit.
