Management features
| Multicast support |
Y |
| MIB support |
RFC 1213 MIB II, RFC 1643, RFC 1493 |
Data transmission
| MAC address table |
4000 entries |
| Store-and-forward |
Y |
| Maximum data transfer rate |
1 Gbit/s |
Design
| Safety |
CE mark, cUL IEC950/EN60950 |
Networking
| Flow control support |
Y |
| DHCP client |
Y |
| Broadcast storm control |
Y |
| Link aggregation |
Y |
| Full duplex |
Y |
Security
| MAC address filtering |
Y |
| Access Control List (ACL) |
Y |
Other features
| Networking features |
Gigabit Ethernet |
| Authentication method |
IEEE 802.1x |
| Latency |
2900ns |
| Bandwidth |
96 Gbit/s |
| Electromagnetic emissions |
CE mark, FCC Part 15 Class A, VCCI Class A, C-Tick |
Operational conditions
| Non-operating altitude |
0 - 3000 m |
| Operating altitude |
0 - 3000 m |
Ports & interfaces
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-T, 10BASE-T |
| Basic switching RJ-45 Ethernet ports quantity |
48 |
| SFP module slots quantity |
4 |
| SFP/SFP+ slots quantity |
4 |
| Gigabit Ethernet (copper) ports quantity |
4 |
Performance
| Noise level |
44.8 dB |
| Internal memory |
3 MB |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
Y |
Additionally
| Jumbo Frames support |
Y |
| Wireless technologies |
Wired |
GS748TP - 1 Gbit/s, 4000 entries, 48 10/100/1000 ports
Full 24-port or 48-port PoE Solution Plus Easy Browser-based Management
NETGEAR ProSafe Smart Switches fill the gap between unmanaged and fully managed switches. The family of ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2 management implementation. These PoE capable Smart Switches, the GS724TP and GS748TP, provide power and data using built-in IEEE 802.3af PoE on all 24 or 48 ports. In addition, they offer an intuitive webbased management tool for quick and easy deployment and configuration making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. This switch is equipped with highly advanced features such as Access Control Lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting and IGMP Snooping among others to provide a small and medium-sized business with a network that is geared for growth while providing scalability and reliability. With the utility of 24 or 48 10/100/1000 Mbps ports, two or four combination (Copper/hot-swappable Small Form-factor Pluggable (SFP)) Gigabit ports for optional fiber connectivity, growing business networks, classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. These high performing switches feature a nonblocking wire-speed architecture with a 48 Gbps or 96 Gbps switching capacity for maximum data throughput. All 24 and 48 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link.
Full-featured, flexible Power over Ethernet (PoE)
With a total power budget of 192 Watts for the GS724TP and 384 Watts for the GS748TP, customers can choose to plug in up to 48 802.3af IP-based devices. Power-over-Ethernet (PoE), optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones, and IP-based surveillance cameras. Power-over-Ethernet (IEEE 802.3af) capabilities reduce installation time and costs for many new network productivity devices. Free your wireless AP deployments and IP cameras from the restrictions of power outlet proximity using a standard CAT-5 cable. Enable uninterruptible power supply for all your PoE devices by powering your switch from a UPS device.
Advanced Security
These switches also provide advanced features that provide more robust security to the SMBs. These include:
- 802.1x for authentication.
- ACL filtering to permit or deny traffic based on MAC or IP addresses.
Advanced Quality of Service
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The ProSafe GS724TP and GS748TP provide several advanced QoS features:
- 802.1p based prioritization.
- Layer 3-based (DSCP) prioritization.
- Rate-limiting.
“Smart” Management Features
Manage all ProSafe Smart Switches from an easy-to-use Web console that can be used to configure all features, as well as monitor and trouble-shoot. These switches also have SNMP (v1, 2 and 3) to collect and track data to monitor the network health, as well as manage devices, and more easily enforce critical IT controls and policies. SNMP v2c is most commonly deployed, as it provides better reporting capabilities than SNMP v1. Companies interested in more robust security may opt for SNMP v3, which provides data encryption. These ProSafe Smart Switches provide world-class reliability with a Limited Lifetime warranty and optional ProSupport Maintenance Packages. These switches are optimized for ProSafe Network Management Software (NMS100) and works with other SNMP-based management software.
