Protocols
| DHCP server |
Y |
| DHCP client |
Y |
| Supported network protocols |
PPPoE, Static IP, L2TP, PPTP, WISP, DNS, PSE |
Performance
| Reset button |
Y |
| Quality of Service (QoS) support |
Y |
| Frequency band |
2.4 - 2.4835 GHz |
| 5 GHz |
N |
| Transmitting power |
30 dBmW |
| Universal Plug and Play (UPnP) |
Y |
| Receiver sensitivity |
-99dBm |
| 2.4 GHz |
Y |
| Ethernet LAN data rates |
10, 100 Mbit/s |
Power
| Power over Ethernet (PoE) |
Y |
Antenna
| Antenna gain level (max) |
10 dBi |
| Integrated antenna |
Y |
Ports & interfaces
| WAN connection |
Ethernet (RJ-45) |
Additionally
| AC adapter bundled |
Y |
| Ethernet LAN (RJ-45) ports quantity |
2 |
| Transfer rate (Mbps) |
300 Mbit/s |
2.4GHz, 300Mbps, 802.11b/g/n, Fast Ethernet, PoE
<b>300Mbps Wireless N High Power Outdoor AP Router</b>
The netis 300Mbps Wireless N High Power Outdoor AP Router WF2322 provides long range, high performance wireless Internet access over long distance. The maximum 1000mW transmit power enables you long range connectivity. Also, with 15kV ESD protection and IP55 Waterproof for case, WF2322 is suitable for harsh environment, providing users a stable and smooth networks connection.
With high transmission power up to 30dBm/1000mW and built-in 10dBi dual polarization directional antenna, the 300Mbps Wireless N High Power Outdoor AP Router WF2322 gets a perfect performance in long-distance wireless connection over 10Km, tested in the field.
Featured with IP55 waterproof function and up to 15KV ESD protection, WF2322 is designed to work in harsh outdoor environment. It may ensure you a reliable operation in some place with extreme bad weather conditions.
WF2322 supports AP, AP Router, WISP as operation modes. And under AP Router mode, it provides Access Point, Client, WDS, AP+WDS, Client+Repeater modes for various wireless solutions. Based on your current network structure, you can flexibly choose a suitable wireless mode to build or extend the wireless network.
The equipped PoE Injector is used forPoE connection to WAN/LAN port and it features with a Reset button which can be used to remote reset WF2322 to factory default settings quickly. Then you don’t have to take your WF2322 off from the mounting pillar which is in high position or try to get into the web configuration to finish the reset issue.
It provides a second LAN port for you to connect wired device like computer, switch. Also, the LAN2 port can supply power (3W with 24V/500mA power adapter) for the passive PoE supported device.
The WF2322 can be powered by an Ethernet cable whichtransmits data and electricity at the same time through WAN/LAN Port. It allows you to locate the device in a position even the power slot is not available.
