Microphone
Type |
Stage/performance microphone |
Microphone frequency |
20 - 20000 Hz |
Additionally
Wireless technologies |
Wired |
D-01 Single Microphone, Nickel
<b>D-01 Specifications</b>
Acoustic transducer: K 07 large double-diaphragm capsule,
diameter 30 mm with protected internal electrodes
Directional characteristic: 15 remote controllable polar patterns,
from omni to cardioid to figure-8
Frequency response: 20 Hz to 20 kHz
Free-field sensitivity1) 2): –44 dBFS
Equivalent noise level, CCIR3): 19 dB
Equivalent noise level, A-weighted3): 8 dB-A
Signal-to-noise ratio2), CCIR3): 75 dB
Signal-to-noise ratio2), A-weighted3): 86 dB
Maximum SPL at 0 dBFS: 138 dBSPL
Dynamic range, A-weighted3): 130 dB
Supply voltage range: +6 V to +10.5 V
Current consumption: max. 220 mA
Weight: approx. 700 g, Diameter: 63.5 mm, Length: 185 mm
<b>General Specifications of the Solution-D microphones</b>
Interface: AES42
Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download
A/D conversion: Neumann process (patented),
28-bit internal word length
Digital signal processing: Fixed-point,
variable internal word length 28 bits to 60 bits
<b>Synchronization:</b>
- Asynchronous operation (free-running, AES42 - Mode 1), basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2), pulling range: Min. ± 100 ppm
Power supply (phantom power complying with AES42)
Output: XLR3M, 24 bits as per AES/EBU (AES3)