Lighting
| Lamp type |
LED |
| Lamps quantity |
1 |
| Luminous flux |
950 lm |
| Number of light modes |
6 |
| Luminous intensity |
5000 cd |
| Beam range |
142 m |
| Number of power levels |
6 |
Power
| Number of batteries supported |
1 |
| Battery type |
18650 |
| Battery life (max) |
24 h |
Design
| Shock proof up to |
1.5 m |
| Shock proof |
Y |
950 lm, 1440 min, 142m, 5000 cd, IPX8
The S2 Baton (S2) is a new side switch LED flashlight powered by a single 18650 battery or two CR123A lithium batteries. The S2 uses a high performance Cree XM-L2 LED which is able to deliver a maximum output of 950 lumens. The S2 carries a homogeneous beam by using a 90% light transmittance PMMA TIR lens that provides the light with a cool white balanced appearance. The S2 continues to apply the same signature features as the OLIGHT S-series flashlights including a low-profile side switch, removable pocket clip, magnetic tail cap, and timer. The S2 is the best choice for users looking for a flashlight that can take an 18650 battery and still have an extremely small form factor.
- Cree XM-L2 / U3 LED
- Maximum output up to 950 lumens
- 22 degree emission angle 90% transparent ratio PMMA TIR lens to deliver homogenous spot light
- Stainless steel bezel and switch ring with PVD coating
- 4 standard modes: 950 lumens, 400 lumens, 80 lumens, 10 lumens
- 2 special modes: 0.5 lumens and 10Hz strobe mode
- Turbo mode has a limit of 2 minutes for constant on, after that the light output will ramp down by 50% within 1 minute
- built-in thermal management safety program.
- Built-in timer: 3 minutes (short timer)or 9 minutes (long timer)
- Flat tail cap design contains a strong magnet providing the ability to place it upside down and use it as a hands-free
- work light
- Positive polarity end on the battery faces the tail of the flashlight, reverse polarity protection to prevent improper battery installation
- Removable pocket clip that is scratch resistant
- Low standby current below 10uA
