Omnitron 8205-9 Managed network switch

4-Port 10/100BASE-TX Managed Ethernet Switch - The iConverter 4Tx Managed Ethernet Switch supports 10BASE-T or 100BASE-TX on four UTP ports
- Enhanced features include Port VLAN, Port Access Control and MIB Statistics
- Multiple 4Tx modules can be installed to expand the port concentration in a single chassis
- Supports Half or Full-Duplex and auto-negotiation
- RJ-45 crossover support eliminates need for different cables in connecting to various devices
- Ethernet backplane ports for connectivity to adjacent modules
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX specifications
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- Lifetime Warranty and free 24/7 Technical Support

The iConverter 4Tx 10/100 Ethernet Switch module is a member of the managed iConverter product family. The 4Tx provides a compact 4-Port 10/100 Ethernet switch that is expandable across the iConverter 19-Module, 5-Module and 2-Module chassis backplanes, as well as being supported as a standalone switch with the iConverter 1-Module Chassis.

The iConverter 4Tx UTP ports feature 10/100Mbps, Half or Full-Duplex and auto-negotiation with both hardware and software controls. Hardware control is available for two ports while all four ports are under software control for these features.

RJ-45 crossover support eliminates need for a crossover cable and facilitates connectivity to different types of network equipment. The 4Tx crossover switch is supported on Port 1. Ports 2, 3 and 4 support an automatic crossover detection mode. The 4Tx also features two Ethernet backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module.

4Tx enhanced features include Port VLAN which allows complete control of traffic flow between a module's ports, and Port Access Control which incorporates remote enabling and disabling of each individual port. The 4Tx supports reporting of MIB statistics that are available for 32 variables per port, reporting a wide range of real-time packet statistics to provide performance and operational monitoring.

iConverter 4Tx modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.