Performance
Rx power (min) |
-23 dBmW |
Link budget |
18 dB |
Tx power (min) |
-5 dBmW |
Maximum transfer distance |
34000 m |
Fiber mode structure |
Single-mode |
Wavelength |
1310 nm |
Rx power (max) |
-3 dBmW |
Operational conditions
Operating altitude |
-100 - 4000 m |
Power
Input voltage |
100-240 V |
Input current |
0.5 A |
Input frequency |
50/60 Hz |
Additionally
Wireless technologies |
Wired |
Transfer rate (Mbps) |
1000 Mbit/s |
4 xT1/E1, 10/100/1000BASE-T, 1000BASE-X, RJ-48, SM, DF, SC, 34km, 1310nm, 18 dBm, 2.5 lbs
<b>Features:</b>
- Multiplexes four independent T1 or E1 channels from copper links into one fiber link
- 10/100/1000 copper Ethernet multiplexed with T1/E1 circuits
- Small Form Pluggable (SFP) or fixed-fiber transceivers, in standard and CWDM wavelengths
- Supports multimode, single-mode dual fiber, single-mode single-fiber
- Remotely-managed configuration and testing enables rapid deployments
- Management via local serial port, Telnet or SNMP
- Configurable alarm relay contacts for audio/visual fault notification
- Supports local and remote fiber and copper loop-back modes
- Commercial (0 to 50º C) and wide (-40 to 60º C) operating temperature ranges
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 4xT1/E1 MUX/M multiplexes up to four T1/E1s and Ethernet onto a fiber optic transport link, and features remotely managed testing and configuration capabilities.
The iConverter 4xT1/E1 MUX/M operates in a back-to-back configuration, with one multiplexer at each end of the fiber transport link. The 4xT1/E1 MUX/M can be used in applications where services from legacy TDM equipment require transport across long distances that exceed the reach or capacity of copper. This includes applications such as T1/E1 extension, mobile backhaul and building-to-building PBX connectivity, making it ideal for Enterprise, Telecom and Utility industries.
The 4xT1/E1 MUX/M supports fixed-fiber and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The 4xT1/E1 MUX/M supports multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
The copper interfaces feature four RJ-48 connectors for balanced T1/E1 applications. An optional adapter cable is available to convert each RJ-48 interface to a BNC interface for unbalanced E1 transport applications.
The 4xT1/E1 MUX/M supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of the T1/E1 line codes and line build-out.
The 4xT1/E1 MUX/M features user-selectable local loop-back on both the copper and fiber ports, remote fiber loop-back and circuit test modes. These functions facilitate diagnosis of the remote unit, and minimizes the need for test equipment and support personnel at each end of a link. Alarm relay and LEDs provide fault notification for loss of power, LOS and AIS.
Configuration of T1/E1 line codes, line build out, loopbacks and circuit test is accomplished via local serial port, Telnet, SNMP or DIP-switches.
The 4xT1/E1 MUX/M is a compact, managed standalone unit available in both AC and DC models. The AC model accepts AC power input ranging from 100VAC to 240VAC, 50/60Hz, while the DC model accepts 18VDC to 60VDC.