Power
Input frequency |
50/60 Hz |
Power over Ethernet (PoE) |
N |
External power adapter |
Y |
Input voltage |
100-120 V |
Performance
Wavelength |
850 nm |
Rx power (max) |
-3 dBmW |
Rx power (min) |
-17 dBmW |
Link budget |
7 dB |
Tx power (min) |
-10 dBmW |
Maximum transfer distance |
550 m |
Fiber mode structure |
Multi-mode |
Tx power (max) |
-4 dBmW |
Operational conditions
Operating altitude |
-100 - 4000 m |
Networking
Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Additionally
Ethernet LAN (RJ-45) ports quantity |
1 |
Wireless technologies |
Wired |
Transfer rate (Mbps) |
1000 Mbit/s |
1000BASE-T to 1000BASE-SX/LX Managed Media Converter, MM, LC, 550m
The iConverter Gx AN Media Converter is a managed media converter that provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices.
The UTP port supports auto-negotiation or forced negotiation of duplex modes and pause capability while the fiber port supports both manual or auto-negotiation.
The iConverter Gx AN features user-selectable link fault detection modes, including Link Propagate, Link Segment and Remote Fault Detection. These Link Modes provide rapid fault detection and isolation by monitoring the state of the cabling hardware, and operate independently of the network management.
Fixed-fiber connectors are available with multimode (MM) dual fiber, single-mode (SM) dual fiber and single-mode single-fiber (SF) options. They support ST, SC, LC and MT-RJ connectors with distances up to 220/550m over MM fiber, 140km over SM fiber and 40km over SF. The Gx AN Small Form Pluggable (SFP) model supports a wide variety of 1000BASE-X SFP transceivers.
The iConverter Gx AN is available as a compact, unmanaged standalone unit or as a chassis managed plug-in module. The hot-swappable plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
As a standalone unit, the Gx AN is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power.
The iConverter Multi-Service Platform consists of Network Interface Devices, T1/E1 multiplexers, CWDM multiplexers and managed media converters that combine to deliver Carrier Ethernet and TDM services over fiber or CWDM wavelengths. This flexible architecture supports a wide variety of configurations for scalable and reliable fiber connectivity in Service Provider and Enterprise networks.