Performance
| Rx power (max) |
-3 dBmW |
| Rx power (min) |
-20 dBmW |
| Link budget |
10.5 dB |
| Fiber cable diameters supported |
9/125 µm |
| Tx power (min) |
-9.5 dBmW |
| Maximum transfer distance |
20000 m |
| Fiber mode structure |
Single-mode |
| Tx power (max) |
-3 dBmW |
Operational conditions
| Operating altitude |
-100 - 4000 m |
Networking
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Power
| Input voltage |
100-240 V |
| Input frequency |
50/60 Hz |
| Power over Ethernet (PoE) |
N |
| External power adapter |
Y |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
1000 Mbit/s |
10/100/1000BASE-T UTP to 1000BASE-X Intelligent Media Converter and Network Interface Device, SM/SF, SC, 20km
The iConverter GX/TM2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The GX/TM2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.
The GX/TM2 is available as a compact standalone unit or as a chassis plug-in module. The hot-swappable GX/TM2 plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The plug-in module can manage other modules in the same chassis and operate as a managed 10/100/1000 media converter. It features two Gigabit Ethernet backplane ports for connectivity to adjacent modules in a chassis for multi-port and multi-service configurations.
The standalone GX/TM2 is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power. The GX/TM2 standalone unit combines management capability with a compact chassis for deployment at the demarcation point.
