Technical details
| Apple docking compatibility |
iPhone, iPod |
| RS-232 interface |
Y |
| Handheld remote control |
Y |
Audio
| Frequency range |
5 - 100000 Hz |
| Output impedance |
470 Ω |
| Input impedance |
47000 Ω |
| Input sensitivity |
200 mV |
| Total Harmonic Distortion (THD) |
0.05% |
| Dynamic power per channel (3 Ohm) |
320 W |
| Dynamic power per channel (4 Ohm) |
270 W |
| Dynamic power per channel (8 Ohm) |
160 W |
| Power output per channel (1KHz@6 Ohm) |
200 W |
| Impedance |
75 Ω |
Packaging content
| User guide |
Y |
| Batteries included |
Y |
| FM antenna |
Y |
| AM antenna |
Y |
Radio
| Supported radio bands |
AM, FM |
| FM band range |
87.5 - 108 MHz |
| Radio Data System (RDS) |
Y |
| RDS features |
TP, RT, PTY, PS |
| AM band range |
522 - 1611 kHz |
| Preset stations quantity |
40 |
Outputs
| Composite video out |
1 |
| Multichannel audio output type |
RCA |
| Component video (YPbPr/YCbCr) out |
1 |
Ports & interfaces
| VGA (D-Sub) ports quantity |
1 |
| AM antenna ports quantity |
1 |
| FM antenna ports quantity |
1 |
| Phono inputs (RCA) |
1 |
Inputs
| Line-in |
Y |
| Multichannel audio input type |
RCA |
| Digital audio optical in |
3 |
| Remote (IR) input |
1 |
| PC in (D-Sub) |
Y |
| HDMI in |
9 |
| Digital audio coaxial in |
3 |
| USB ports quantity |
2 |
| Composite video in |
5 |
| Component video (YPbPr/YCbCr) in |
2 |
Additionally
| RS-232 port |
1 |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Ethernet LAN connection |
Y |
9.2, 250 W/Ch, 0.05% THD, 70mV, 110dB, AM/FM, 29kg
<b>9.2-Channel Network A/V Receiver</b>
Thrill to the Power of Nine-Channel Entertainment
The ultimate hub for house-wide entertainment, the TX-NR3010 can drive audio in three rooms, output high-resolution video on two displays, and stream audio via DLNA—all controlled by your iPhone or Android-powered phone. With a total of 11 HDMI® ports (including MHL™ for smart phone) and 11.4-channel pre-outs, the home cinema setup possibilities are limited only by your imagination. The receiver boasts Audyssey MultEQ® XT32 room correction and three incredible sound expansion systems—DTS Neo:X™, Audyssey DSX®, and Dolby® Pro Logic® IIz—while a combination of Qdeo™, HQV®, and ISF technology upscales and calibrates video sources to 4K resolution. As an audiophile-spec component, the TX-NR3010 features a massive main transformer, additional transformers for audio and video processing, and separated pre-amp and power amp blocks. Audio signals are jitter-cleaned and converted to analog by 192 kHz/24-bit DACs and VLSC™ circuits before passing through the Three-Stage Inverted Darlington Circuitry. The resulting sound quality is awe-inspiring—and with differential DAC mode and Digital Processing Crossover, bi-amping your front monitors results in even higher performance. Easily set up and controlled using the HDMI-enabled user interface, this THX® Ultra2 Plus™-certified receiver is waiting to reignite your passion for music and cinema.
