Power
Input voltage |
220 - 240 V |
Input frequency |
50 - 60 Hz |
ST 171 BLI1 starter for fluorescent lamps in single circuits, 30 - 65W, 220 - 240V
OSRAM starters ignite every time, reliably and quickly. And they are gentle on lamps. Each starter is subjected to strict manufacturing and quality control tests. All starters have a self-extinguishing insulated casing made of Makrolon and meet the conditions laid down for protection class II.
They are equipped with a special compensating capacitor (foil winding capacitor), are VDE approved and carry the ENEC, VDE and CE marks. To ensure reliable ignition we recommend that you also replace the starter when you replace the lamp - except in the case of DEOS SAFETY.
Switching life from ≧ 10000 switching operations to ≧ 60000 switching operations in inductive mode.
20% longer life with fluorescent lamps.
Replace the starter each time the lamp is replaced.
- DEOS ST 171 SAFETY, DEOS ST 172 SAFETY and DEOS ST 173 SAFETY are safety starters.
- DEOS ST 171 SAFETY, DEOS ST 172 SAFETY and DEOS ST 173 SAFETY are designed to operate with conventional control gear (CCG) and low-loss gear (LLG).
- They reliably disconnect burnt-out or faulty lamps under inductive or capacitive operating conditions.
- They are instantly ready for operation when the red button is pressed in (there must be an audible click).
- The automatic cut-out circuit protects the choke and the starter itself.
- Their service life is four times that of conventional starters.
- To ensure reliable ignition and operation the DEOS ST should be replaced after every four lamp replacements.
- Temperature range for reliable cut-out: -20 °C to +80 °C.