Ports & interfaces
| FireWire 400 |
N |
| FireWire 800 |
N |
| VGA (D-Sub) ports quantity |
1 |
Processor special features
| Number of QPI links |
2 |
| Execute Disable Bit |
Y |
| Idle States |
Y |
| Intel Trusted Execution Technology |
N |
| Intel Virtualization Technology (VT-x) |
Y |
| Memory channels supported by processor |
Triple |
| Physical Address Extension (PAE) |
Y |
| Intel 64 |
Y |
| Embedded options available |
Y |
| Intel Virtualization Technology for Directed I/O (VT-d) |
Y |
| Intel® Smart Cache |
Y |
| Intel Hyper-Threading Technology |
N |
| Intel® Turbo Boost Technology |
N |
| Intel Enhanced Halt State |
Y |
| Intel VT-x with Extended Page Tables (EPT) |
Y |
| Enhanced Intel SpeedStep Technology |
Y |
| Intel Demand Based Switching |
Y |
| Memory types supported by processor |
DDR3-SDRAM |
Processor
| Processor cache |
4 MB |
| Processor lithography |
45 nm |
| Thermal Design Power (TDP) |
80 W |
| Physical Address Extension (PAE) |
40 bit |
| Processor package size |
42.5 mm |
| Processor ARK ID |
40711 |
| Processor code |
SLBF9 |
| Processor cache type |
Smart Cache |
| Memory bandwidth supported by processor (max) |
19.2 GB/s |
| CPU configuration (max) |
2 |
| CPU multiplier (bus/core ratio) |
15 |
| Processor operating modes |
64-bit |
| Stepping |
D0 |
| Processor cores |
4 |
| Processor frequency |
2 GHz |
| Maximum internal memory supported by processor |
144 GB |
| Tcase |
76 °C |
| ECC supported by processor |
Y |
| Bus type |
QPI |
Power
| Power supply unit (PSU) capacity |
800 W |
Storage
| Hard drive speed |
7200 RPM |
| Total installed storage capacity |
12000 GB |
| Hot-swap drive bays |
Y |
| Storage drive capacity |
1000 GB |
Operational conditions
| Operating altitude |
0 - 3048 m |
Additionally
| Fibre Channel |
Y |
| RS-232 port |
1 |
| System bus data transfer rate |
4.8 GT/s |
| Ethernet LAN (RJ-45) ports quantity |
2 |
| Internal RAM |
2 GB |
12.0TB (12 x 1TB), SATA II, 7200 rpm, RAID 5/6, iSCSI, Intel Xeon e5504 quad-core Nehalem CPU, 2GB DDR3 1333MHz Registered DIMMs, 2 x 1GbE RJ-45, 2U
Unleash the Power of Disk for Backup and Recovery
If you’re like most IT administrators, you’re battling on multiple fronts when it comes to data protection. On one hand, your storage capacity is constantly growing; and on the other you’re contending with the ever-increasing expectations of your business – backup window reduction, aggressive Recovery Time Objectives (RTOs), and stringent compliance mandates. Overland’s REO® Series Virtual Tape Libraries (VTL) enables you to leverage the performance and reliability of disk to drastically increase the speed and efficiency of your backups and restores.
Lightning-quick speed is just the beginning. Built on Overland’s Protection OS™, REO VTL also delivers a core set of volume and device virtualization, management, and connectivity features that give you increased flexibility and ease of use. You can seamlessly integrate your REO into your existing backup infrastructure by emulating the tape libraries and drive formats you already use. You can quickly and efficiently create tapes for compliance, disaster recovery or archive, restore from disk even when physical tapes are not present, and easily manage your REO from anywhere in the world. Disk is a powerful tool for backup and recovery – harness it with REO Series VTL.
Affordable, scalable, flexible. When you need disk-based backup and recovery that provides uncompromising support for growth, can be deployed as VTL or disk volumes, and doesn’t break your IT budget, the REO 4600 is your choice. With the ability to scale from 12TB to 240TB, the REO 4600 is ideal for businesses of any size.
Configurations begin with a 12-drive appliance module. Expansion is facilitated by adding up to four E2000 SAS-connected expansion arrays. Each E2000 delivers 6, 12 or 24TB, depending upon the drive size you choose. Hardware compression effectively gives the REO 4600 a total of 240TB compressed capacity without affecting performance or useable virtual tape capacity.
It's easy to configure the REO 4600 as a virtual tape library and/or any mix of standalone virtual tape drives or disk volumes (LUNs) for maximum flexibility. Patent-pending Dynamic Virtual Tape™ (DVT) ensures that no storage capacity is wasted while eliminating the manual effort and guesswork of sizing, configuring, provisioning, and deleting virtual tape cartridges. With DVT, users can create virtual tape cartridges that automatically expand or shrink as needed to match the exact capacity requirements of the backup operation.
The REO 4600 is compatible with all popular open systems or Windows-based backup software, physical tape drives, and libraries. It connects easily to Ethernet (iSCSI) or Fibre Channel (FC) networks and a simple browser-based interface, proactive monitoring, and remote management capabilities combine to make the 4600 simple and cost effective to manage.
