Data transmission
| Supported data transfer rates |
10/100/1000 Mbps |
| Switching capacity |
24 Gbit/s |
| Maximum data transfer rate |
1 Gbit/s |
| Number of VLANs |
256 |
Other features
| Authentication method |
802.1x, RADIUS |
| Connectivity LEDs |
Y |
| Management platform |
CLI |
| Non-operating relative humidity (non-condensing) |
0 - 90% |
| Installed ports |
24+2+1 |
| Acoustic noise note |
15dB |
| Expansion slots |
- 24 x 10Base-T/100Base-TX RJ-45\n- 2 x 10Base-T/100Base-TX/1000Base-TX RJ45\n- 1 console (DB-9) |
| Input frequency |
47/63 Hz |
Networking
| Port mirroring |
Y |
| DHCP client |
Y |
| DHCP server |
Y |
| IGMP snooping |
Y |
| Full duplex |
Y |
Power
| Input voltage |
100 - 240 V |
| Input current |
1 A |
Performance
| Stackable |
Y |
| Packet buffer memory |
64 MB |
Security
| Static port security |
Y |
| SSH/SSL support |
Y |
| MAC address filtering |
Y |
Protocols
| Data link protocols |
Ethernet, Fast Ethernet |
| Management protocols |
SNMP v1/2, RMON 1,2,3,9, Telnet, SSH, NTP |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
24 |
Management features
| Quality of Service (QoS) support |
Y |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
Additionally
| Wireless technologies |
Wired |
OV-3226S - network manageable L3 Fast Ethernet switch, 24 x 10Base-T/100Base-TX RJ-45, 2 x 10Base-T/100Base-TX/1000Base-TX RJ45, 1 x console (DB-9)
Hi-performance, Network Manageable Fast Ethernet Switch
OvisLink is proud to present the new OV-3226S as the next-generation Fast Ethernet L3 switch. It has an advanced architecture, 24 Gbps switch fabric, and 6.6 Mpps L3 forwarding rate. Its hardware wire-speed L3 switching capability provides a powerful, multi-layered solution not only for enterprises, but also for Internet Service Providers (ISP’s) and telecom carriers.
Application
OvisLink OV-3226S is an enterprise-class switch providing Fast Ethernet and Gigabit
Ethernet configurations. The OvisLink OV-3226S is an ideal access layer switch for small
enterprise LAN access or branch-office environments, enabling the deployment of new
applications such as IP telephony, video surveillance, building management systems, etc.
Customers can deploy network intelligent services such as quality of service (QoS), rate
limiting, access control lists (ACL s), NAC , multicast, and high-performance IP routing
while keeping the simplicity of traditional LAN switching.
The OvisLink OV-3226S provides:
- Intelligent features at the network edge, such as sophisticated access control lists (ACL s) and enhanced security.
- Combo Gigabit Ethernet ports flexibility, allowing use of either a copper or a fiber uplink. The combo port has one 10/100/1000 Ethernet port and one Small Form-
Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time
(using expansion modules)
- Network control and bandwidth optimization using QoS, granular rate limiting, ACLs
(L2-L4), and IGMP Snooping.
- Network security through a wide range of authentication methods, and Network Access Control based on users, ports, and MAC addresses.
- Extended manageability using CLI.
- Manageable through cluster technology allowing management using only one IP address.
- Dynamic unicast IP routing, including the most popular and standard protocols such
as RIPv1/2, OSPF, BGP and a Cisco EIGRP compatible (BEIGRP).
- In addition to dynamic IP unicast routing, the OV-3226S is perfectly equipped for
networks requiring multicast support providing Protocol Independent Multicast (PIM)
and Internet Group Management Protocol (IGMP).
- IP services such as DHCP, Proxy ARP and NAT.
- Reliability using Virtual Router Redundancy Protocol (VRRP).
- Automatic recognition for straight-through or cross-over cables.
- Free software updates.
