Networking
| Cabling technology |
10/100Base-T(X) |
| Wi-Fi |
Y |
| Supported network protocols |
HTTP, FTP, SMTP, TCP, UDP, IP, DHCP, DNS, ARP, ICMP, POP3 |
Image sensor
| Optical sensor size |
1/4 " |
| Effective sensor resolution |
320000 pixels |
| Sensor type |
CMOS |
Camera
| Minimum illumination |
10 lx |
Power
| Power over Ethernet (PoE) |
N |
| DC-in jack |
Y |
Performance
| Light exposure modes |
Auto |
| Type |
IP security camera |
Additionally
| Ethernet LAN connection |
Y |
| Wireless technologies |
Wired & Wireless |
| AC adapter bundled |
Y |
| Ethernet LAN (RJ-45) ports quantity |
1 |
Wireless Network Camera
Keep an Eye on Your Pets.
Always feel close to your pets, whether at work or on vacation. Did the walker show up as promised? Is the dog sleeping on the sofa? Is the cat scratching your new leather chair? You'll know instantly with the Panasonic PetCam.
See There When You Can't Be There.
These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1. Place them in your home, office, vacation home or almost anywhere else that you'd like to keep an eye on things, with no PC required on location!. They are easy to install and operate and require no additional software for the PC that you're viewing them on. Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.
802.11b/g Wireless Communication.
This camera can communicate wirelessly with standard 802.11b or 802.11g wireless devices, allowing the flexibility to install and operate the camera without running network wires, and utilizing SSID filtering and powerful 40/64/128 bit WEP encryption helps to protect your wireless network from illegal intrusion.
Just Plug It In and Play.
This network camera is truly easy to install and use in most cases. With industry standard automatic configuration (UPnP), the camera and your router or PC will automatically decide the best settings allowing you to access your camera without any complicated setup. Once connected, using a simple Web browser, just enter in your free, permanent Web address which comes with the camera and you can see the camera! It's that simple.
Sensor Recording and Email Alerts.
With the built-in motion sensor, the camera can be set to record and/or notify you by email when someone enters the room.
Connecting the camera to the Internet requires Internet access and may require that you obtain additional hardware such as a cable or DSL modem, or a hub or router with a 10Base-T Ethernet connection. The camera will not be accessible from across the Internet unless the Internet connection is active. We cannot guarantee that your Internet connection will always be available. The frame rate of the motion image may be dependent upon the uplink speed of the Internet connection and other factors. Viewing may involve some time delay. Recommended minimum 100kbps upstream bandwidth for camera.
