Features
| Buzzer off |
Y |
| LED indicators |
Y |
| Reset button |
Y |
Performance
| Analog signal format system |
NTSC, PAL |
| Copper ethernet cabling technology |
10BASE-T, 100BASE-TX, 1000BASE-T |
| Video input channels |
32 channels |
Storage
| Hard drive size |
3.5 " |
| Hard drive capacity |
4096 GB |
| Compatible memory cards |
SD, SDHC |
| Number of hard drives installed |
2 |
| Card reader integrated |
Y |
| Number of hard drives supported |
2 |
| Maximum storage capacity |
8 TB |
| RAID support |
Y |
| Total installed storage capacity |
8192 GB |
| Hard drive interface |
Serial ATA |
32-CH, H.264, G.726, HDMI, 2 HDD 4TB, Serial ATA, 8.89 cm (3.5 ") , RAID support
- H.264 and JPEG multi format
- (PAL model) 9 network cameras can be connected and recorded as default. Up to 32 *1 network cameras can be connected and recorded.
- (NTSC model)16 network cameras can be connected and recorded as default. Up to 32 *1 network cameras can be connected and recorded.
- Quick setup by automatic camera detection and simple setup wizard without the use of PC
- "Referenced recording days" is automatically calculated by frame rate, image quality and HDD capacity.
- Simple mouse operation by new GUI without the use of PC
- Quick intuitive search with calendar and timeline
- Live images from up to 32*1 cameras can be displayed simultaneously.
- Supports the Full HD output (HDMI) that can display recorded images and live images in high definition
- Various alarm sources include 9x Terminal inputs, 32x Camera alarm, Panasonic Alarm Protocol. Flexible alarm actions include Alarm recording, E-mail notification, Alarm message, Camera positioning, Terminal output, Panasonic alarm protocol output, Buzzer and Indicator.
- Camera Control: Pan/Tilt, Zoom, Focus, Brightness, Preset Position, Auto mode (depending on camera model)
- Audio from the i-PRO network cameras can be recorded and played back, G.726 (ADPCM) 32 kbps.
- Flexible Playback Controls: Go to Date (Jump to specific time/date), Go to Last (Jump to 30 s before the record end)
- Various Display Modes: Spot, Multiscreen (4 / 16 split screen display, 4 / 6 / 9 / 12 / 16 / 24 / 32 *1 split screen display on a full screen)
- Various Recording Modes: Schedule, Event (Pre/Post)
- Filtered Search: Time & Date, Event Type, Camera number, Timeline
- Recorded images can be downloaded to a PC.
- Downloadable viewer software allows playback of images downloaded from the Recorder.
- Equipped with a SD memory card slot and USB memory I / F. It realizes a simple local copy.
- Built-in network interface (10Base-T / 100Base-TX / 1000Base-T) for recording and client access
- Up to 8 clients can monitor image and control WJ-NV300 simultaneously.
- Up to 2 HDDs can be installed. (8.89 cm (3.5 inch) Serial ATA HDD)
- HDD capacity is expandable up to 20 HDD slots (2 HDD slots in the main unit and 2 optional WJ-HDE400 Hard Disk Extension Units each with 9 HDD slots).
- RAID5/6 redundant recording for data security (with WJ-HDE400)
- User authentication, 3 user levels and User level - Camera partitioning setup for user management of up to 16 user registrations
- Multi-recorder, Multi-site system can be made with optional WV-ASM200 i-PRO Management Software.
- ONVIF client, conformance to ONVIF Profile S.
- 1 (PAL model)Three Additional Camera Kits WJ-NVE30 are necessary. (NTSC model)Two Additional Camera Kits WJ-NVE30 are necessary.
