Networking
| Auto MDI/MDI-X |
Y |
| Duplex system |
Half, Full |
Other features
| MAC address table |
1024 entries |
Performance
| Maximum transfer distance |
100 m |
| Fiber mode structure |
Single-mode, Multi-mode |
Power
| External power adapter |
Y |
| Input voltage |
100-240 V |
Certificates
| Safety |
UL 60950-1, EN60950, CE |
Operational conditions
| Operating altitude |
0 - 3050 m |
Additionally
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
1000 Mbit/s |
1 x PoE port, 2 x SFP / LC, 100Base-X /1000Base-X, MMF /SMF, 46 - 57 vDC
<b>10/100/1000 PoE Media Converter</b>
10/100/1000 Gigabit Ethernet Standalone Media Rate Converter w/ PoE PSE. 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-X or 100BASE-X - Dual SFP Slot (empty), w/ AC Adapter
Perle's feature rich Gigabit rate converting PoE Media Converters transparently connect copper to fiber while providing Power over Ethernet ( PoE ) to standards-based PoE and PoE+ compliant devices such as IP cameras, VoIP phones and wireless access points.
Perle PoE Media Converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle PoE media converters can also provide power to one or two Powered Devices (PDs). Perle has PoE media converter models that support the IEEE 802.3af PoE standard (15.4W of power) or the IEEE 802.3at PoE+ standard (30W of power). Learn more about PoE.
Perle 10/100/1000 PoE Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network with fiber cabling. At the same time they function as PoE injectors to power devices like IP phones, video conferencing equipment, IP cameras and Wi-Fi devices over copper UTP cabling.
Multi-port PoE media converters enable a variety of flexible network designs. They can feature single or dual RJ-45 ports to power one or two PD’s per converter and single or dual fiber ports.
Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fiber Fault Alert, and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle's Gigabit rate converting PoE Media Converters the smart choice for IT professionals.
- 10/100/1000Base-T to 100/1000Base-X Fiber
- Supplies IEEE 802.3 PoE & PoE+ PSE power
- Compatible with legacy pre-standard PoE devices
- Multiport models: 2, 3 or 4 ports
- Fix fiber ports or empty slot for Cisco and other industry standard SFPs
- Advanced features: PD Reset, Fiber redundancy, Smart Link Pass-Through,
- Fiber Fault Alert, Auto-MDIX and Loopback
