Performance
| Wavelength |
1310 nm |
| Rx power (max) |
-3 dBmW |
| Rx power (min) |
-20 dBmW |
| Link budget |
10.5 dB |
| Fiber cable diameters supported |
62.5 µm |
| Buffer size |
1000 KB |
| Tx power (min) |
-9.5 dBmW |
| Maximum transfer distance |
10000 m |
| Fiber mode structure |
Single-mode |
| Tx power (max) |
-3 dBmW |
Operational conditions
| Operating altitude |
0 - 3048 m |
Ports & interfaces
| Fiber ports quantity |
2 |
| DC-in jack |
Y |
Networking
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
1000 Mbit/s |
S-1110PP-S2ST10-XT - PoE+, 10/100/1000BASE-T (RJ-45, 100m), 1000BASE-LX/LH 1310 nm, SM ST 10km
The S-1110P-XT Industrial Temperature PoE Media Converters address the need for transparently connecting 10/100/1000 Ethernet equipment that operate in extreme temperatures to fiber while providing Power over Ethernet ( PoE ) to standards-based PoE and PoE+ compliant devices.
The S-1110P-XT PoE Media Converters will operate in industrial grade temperatures of -40F to +167F (-40C to +75C). Equipment found in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications must function in temperatures that cannot be supported by a commercial based media converter. Boasting this extended temperature feature along with a rugged steel casing, the S-1110P-XT Media Converter provides an economical path to extend the distance between two industrial devices subjected to harsh environments and severe temperatures such as security cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices.
Perle PoE Media Converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle PoE media converters can also provide power to Powered Devices (PDs) that support the IEEE 802.3af PoE standard (15.4W of power) or the IEEE 802.3at PoE+ standard (30W of power). Learn more about PoE.
Perle 10/100/1000 PoE Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network with fiber cabling. At the same time they function as PoE injectors to power devices like IP cameras and Wi-Fi devices over copper UTP cabling.
Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fiber Fault Alert, and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle's S-1110P-XT Industrial Temperature Gigabit PoE Media Converters the smart choice for IT professionals.
