Performance
| Luminous flux |
2900 lm |
| Bulb power |
36 W |
| Bulb lifetime (@50% failures EM) |
15000 h |
| Chromaticity coordinate X |
380 |
| Chromaticity coordinate Y |
380 |
| Design temperature |
30 °C |
| Luminous efficacy |
81 lm/W |
| Bulb lifetime (@10% failures EM) |
10000 h |
| Color Rendering Index (CRI) |
82 |
| Color temperature |
4100 K |
| Dimmable |
Y |
| Mercury content |
2 mg |
| Bulb size |
4P |
| Rated power |
36 W |
Power
| Energy consumption (1000 hours) |
40 kWh |
| Bulb current |
435 mA |
Additionally
| Energy efficiency compliance |
A |
| Colour code |
841 |
MASTER PL-L 4 Pin, 36W, 2G11, 4100 K, 20000 h, 0.435 A
<b>MASTER PL-L 36W/840/4P 1CT/25</b>
MASTER PL-L is a medium to high-wattage linear compact fluorescent lamp, typically used for general-illumination ceiling luminaires in retail, hospitality and office applications demanding higher lighting levels. The original Philipsinvented bridge technology guarantees optimum performance in the application, enabling more light and higher efficacy than the bended technology. It is designed for operation on electromagnetic as well as electronic HF control gear and is provided with a plug-in/pull-out lamp base.
Energy-saving compact fluorescent lampsCompact long-arc low-pressure mercury discharge lampEnvelope consists of 2 parallel fluorescent tubes.
<b>Benefits</b>
- Optimal light performance for short or long operation per switch on
- Long life and sustainable light output
<b>Features</b>
- 4-pin base without starter and capacitor
- Lamp characteristics are influenced by operating conditions and control gear used
- Lamp performance is governed by temperature of the coolest spot
- Dimming is possible
<b>Application</b>
- Designed for general lighting in shops, offices, hotels and specific task lighting, as well as outdoors in residential areas and parks
<b>Warnings and Safety</b>
- Lamp light technical and electrical characteristics are influenced by operating conditions, i.e. lamp ambient temperature and operating position as well as applied control gear
- Shorter lamp life when often switching and not well pre-heated electrodes
- A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
